Yes I use a few of those in the real old Speeders that were regulated for the 215gr slug, but I haven't been shooting any game with them in the 303, lots in the 30/06 back in the day . Grandpamac...
Liked On: 29-12-2021, 07:54 AM
so thats std .12ga shell redneck .410 adaptor (yes its bit of half inch pipe through a shell and yes it works and patterns fine) 3" long chamber insert to fire .410 or .45LC in .12ga 12" long...
Liked On: 26-12-2021, 12:41 PM
Beer/coke cans are almost exactly 0.1mm. Be easy to cut a couple of washers from that to test the idea and then wrangle up something a little harder as the permanent fix.
Liked On: 13-12-2021, 06:36 PM
Hi all thanks for the useful input. I've come up with a plan and am comfortable I'll either find a load that'll be serviceable during what will effectively be just sighting in and getting familiar...
Liked On: 23-11-2021, 03:55 PM
take the mighty .270 and take the time to use new rifle with load you know is ok.....or take it,risk wounding something when its 450 not 300 and you have a go anyway,and risk a bad start and falling...
Liked On: 22-11-2021, 07:12 PM
I thought I had better check on disposal when LFO dies. This is from the Arms Code. What to do if the firearms licencee dies As a responsible firearm licence holder, you need to make provision...
Liked On: 18-11-2021, 02:14 PM
Wifey went and got her licence to give her time if and when I shuffle off...plurry handy being able to send her into buy ammunition while in getting weekly shopping.
Liked On: 18-11-2021, 02:14 PM
my .223 has taught me lots of lessons over the years how a well placed tiny little projectile drops animals stone dead..aim small that sometimes simple is best. that a good solid reliable scope...
Liked On: 18-11-2021, 02:13 PM
183020
Liked On: 10-11-2021, 05:02 PM
182984 Not used often. Been in the family 80+ years, made late 1870s - early 1880s. 450 x 3.25" BPE Damascus Alex Henry barrels. Now shooting Nitro for Black loads with Woodleigh 350gr. It took a...
Liked On: 06-11-2021, 05:51 PM
182977 This is my Ruger m77 243 think i bought about 1979 , recently had an inch chopped of the barrel and recrowned which has got her grouping around 1.5 inches at one hundred so very happy with...
Liked On: 06-11-2021, 04:15 PM
@ Grandpamac, I wouldn't call it a Hijack, when I started the thread it didn't have much intention of where it would go other than maybe 'no brand new Tikka TX3s' I just had a feeling it would be...
Liked On: 06-11-2021, 08:33 AM
1907 Husqvarna cape gun in 16 gauge and 9.3x57r. So far only the shotgun barrel has been gainfully employed, the rifle barrel though close to 38/55 is proving more difficult to develop a...
Liked On: 06-11-2021, 07:01 AM
Too many to list I have plenty of vintage rifles and really only collect ones that aren't genuine collectors pieces Prefer the ones I can restore and repair and use for what they were intended for...
Liked On: 05-11-2021, 08:19 AM
Not going to win the oldest contest, but the oldest I have is a 1986 Remington 700 in 243. Comfortably a sub MOA gun. Obviously been very well looked after by previous owners. Trigger definitely...
Liked On: 05-11-2021, 07:51 AM