So there we have it folks. Absolutely no conclusive answer to the question. :)
Liked On: 28-03-2021, 08:53 AM
A bit of a story for me on this one. in 1980 when I was 15 my father bought a 1949 BRNO 22 Hornet at a farm clearing sale for me. A beautiful rifle with the hair trigger function and in pretty good...
Liked On: 14-04-2020, 12:26 PM
Work out which projectile and velocity is required to get the job done Make sure your chosen chambering has the best quality brass To be effective past 1000yards use the best components made...
Liked On: 29-03-2020, 10:13 PM
Hi 300BLK, We have been using a 300NM necked to 7mm and improved for some years now, that we call our 7mm Fatmax. It is our favourite 7mm lightweight long range hunting cartridge these days, and we...
Liked On: 16-01-2020, 03:33 PM
I still think the idea of hand feeding 180eldms will be the way to go. Guy i know shoots them out of his 280ai at a touch over 3k and on his last trip shot 1 tahr at over 1140yds(I am 99% sure of...
Liked On: 16-01-2020, 12:11 PM
Arthur Cleland will I think Sent from my CPH1903 using Tapatalk
Liked On: 15-01-2020, 10:45 PM
Dave Ward in Dovedale does. He’s doing one for me as we speak - 7-08 to .284 Win. The last one he did shoots 162s ELD-X into .5 MOA 5 shot groups. He knows what he’s doing.
Liked On: 15-01-2020, 10:31 PM
My new rifle dies arrived on the courier this morning from the US. They were held and opened by customs over the weekend, but passed through without any other issue. I did not need or have a...
Liked On: 14-01-2020, 10:29 PM
Let us know how that gets on with Greg.
Liked On: 14-01-2020, 09:10 PM
The 7 Blaser mag makes more sense than the 28 Nosler Similar performance with around 10 grains less powder. The Nosler dies are cheap but the brass is expensive & hard to get here The Blaser...
Liked On: 14-01-2020, 04:19 PM
here a comparison including N28. 128188 I'm getting ~3060 fps with 7BM with 180 VLDs & RL26 with groups around 0.3moa if i do my part well.
Liked On: 14-01-2020, 02:50 PM
How far have you pushed your current set up? It’s possibly a lot more capable than you think it is. A 168 Berger or ABLR in front of Retumbo or RL26 is no slouch on long range steel or animals.
Liked On: 14-01-2020, 02:50 PM
If you are happy to single feed, a real easy solution could be to just increase the throat length on your rifle while keeping it as a 7mm mag. Seat the projectiles way out, which will free up case...
Liked On: 14-01-2020, 02:50 PM
Reading what you are trying to achieve, I’d suggest doing things properly the first time, probably saving yourself money in the long run and re-barrelling your T3 to 7 Blaser Magnum. This gets...
Liked On: 14-01-2020, 01:16 PM
if you're keen on a non belted 7mm mag, do some home work on the 7mm BlaserMag. 128186 It will fit your mag better & will give you ~ 100fps over a 7mmRM burning less powder :thumbsup:. Not...
Liked On: 14-01-2020, 01:14 PM