I have done a couple of the conversions over the years. The caliber change is the easy part - just set the barrel back about 16mm and recut the chamber. The bolt face, extractor, ejector, and...
Liked On: 29-04-2019, 08:12 PM
I have done a couple of the conversions over the years. The caliber change is the easy part - just set the barrel back about 16mm and recut the chamber. The bolt face, extractor, ejector, and...
Liked On: 28-04-2019, 10:29 PM
I have done a couple of the conversions over the years. The caliber change is the easy part - just set the barrel back about 16mm and recut the chamber. The bolt face, extractor, ejector, and...
Liked On: 28-04-2019, 09:51 PM
Fired cases are completely exempt from any laws or regulations in NZ. Screw the bastards and demand compensation. Fucking Nazis!
Liked On: 28-04-2019, 07:25 PM
Firing pins of any cylindrical design are easy to make and properly heat treat by any competent gunsmith in half an hour or less.
Liked On: 28-04-2019, 07:01 PM
The best thing is Artists Oil (a refined linseed) which is available at any art store, Warehouse, Warehouse Stationery, etc. Inexpensive and quick drying, easily buffed up to a nice sheen. I have...
Liked On: 26-04-2019, 08:29 PM
Barrels do not 'wear in', they just start wearing out when you start shooting them. Just start shooting it with whatever loads you intend to use and clean it properly after each day. Incidentally,...
Liked On: 24-04-2019, 07:15 PM
[QUOTE=hotbarrels;826775]gundoc, do you do trigger polishing for these? Cost? It is a simple and inexpensive job for any half-decent gunsmith. It is better to get it done locally than go...
Liked On: 24-04-2019, 05:00 PM
Barrels do not 'wear in', they just start wearing out when you start shooting them. Just start shooting it with whatever loads you intend to use and clean it properly after each day. Incidentally,...
Liked On: 23-04-2019, 05:52 PM
Barrels do not 'wear in', they just start wearing out when you start shooting them. Just start shooting it with whatever loads you intend to use and clean it properly after each day. Incidentally,...
Liked On: 23-04-2019, 04:02 PM
Barrels do not 'wear in', they just start wearing out when you start shooting them. Just start shooting it with whatever loads you intend to use and clean it properly after each day. Incidentally,...
Liked On: 23-04-2019, 01:25 PM
50-60 metres on rabbits, out to 150 on deer etc. Consistent offhand shooting is a technique that takes time to develop, involving stance, breathing, and trigger control. Ping-pong balls with an air...
Liked On: 21-04-2019, 03:30 PM
The best thing is Artists Oil (a refined linseed) which is available at any art store, Warehouse, Warehouse Stationery, etc. Inexpensive and quick drying, easily buffed up to a nice sheen. I have...
Liked On: 21-04-2019, 12:34 PM
The best thing is Artists Oil (a refined linseed) which is available at any art store, Warehouse, Warehouse Stationery, etc. Inexpensive and quick drying, easily buffed up to a nice sheen. I have...
Liked On: 21-04-2019, 12:21 PM
I realise there are times when Police need to be armed, and we have (an imaginary) upgraded 'threat level' according to the Commissioner. Cromwell is hardly the multi-ethnic crime capital of NZ and...
Liked On: 15-04-2019, 06:05 PM