gundoc
Member

3907 Likes

Page 3 of 261 First 123456789101112131415161753103 ... Last

• Jump to page:

1. 
   mawzer308 liked post by gundoc On thread : Funny what a bullet will do

   For a great many years I have been investigating and experimenting with the unusual performance of bullets after they have contacted something. This has also given me a fair bit of 'expert witness'...

   Liked On: 07-04-2024, 10:52 PM

2. 
   chainsaw liked post by gundoc On thread : Guns blown, persons damaged- powder misadventures- examples

   In my career as a gunsmith I got to see a great many examples of damage caused by poor handloading and sheer carelessness, buckled, bent, and blown guns, shattered stocks, and a surprising lack of...

   Liked On: 30-03-2024, 09:22 AM

3. 
   outlander liked post by gundoc On thread : Guns blown, persons damaged- powder misadventures- examples

   In my career as a gunsmith I got to see a great many examples of damage caused by poor handloading and sheer carelessness, buckled, bent, and blown guns, shattered stocks, and a surprising lack of...

   Liked On: 30-03-2024, 12:08 AM

4. 
   timattalon liked post by gundoc On thread : Guns blown, persons damaged- powder misadventures- examples

   In my career as a gunsmith I got to see a great many examples of damage caused by poor handloading and sheer carelessness, buckled, bent, and blown guns, shattered stocks, and a surprising lack of...

   Liked On: 29-03-2024, 11:44 PM

5. 
   30.06king liked post by gundoc On thread : Guns blown, persons damaged- powder misadventures- examples

   In my career as a gunsmith I got to see a great many examples of damage caused by poor handloading and sheer carelessness, buckled, bent, and blown guns, shattered stocks, and a surprising lack of...

   Liked On: 29-03-2024, 06:46 PM

6. 
   Micky Duck liked post by gundoc On thread : Guns blown, persons damaged- powder misadventures- examples

   In my career as a gunsmith I got to see a great many examples of damage caused by poor handloading and sheer carelessness, buckled, bent, and blown guns, shattered stocks, and a surprising lack of...

   Liked On: 29-03-2024, 06:35 PM

7. 
   Trout liked post by gundoc On thread : Advice about an 1892 Winchester

   Dies, .427" lead projectiles (NOT .429" as in other .44's), and cases are all fairly readily available. The M92 is made strong enough to use with smokeless loads. You are correct with the Saddle...

   Liked On: 27-03-2024, 08:24 PM

8. 
   Micky Duck liked post by gundoc On thread : Advice about an 1892 Winchester

   Dies, .427" lead projectiles (NOT .429" as in other .44's), and cases are all fairly readily available. The M92 is made strong enough to use with smokeless loads. You are correct with the Saddle...

   Liked On: 24-03-2024, 11:41 PM

9. 
   Hunter_Nick liked post by gundoc On thread : Advice about an 1892 Winchester

   Dies, .427" lead projectiles (NOT .429" as in other .44's), and cases are all fairly readily available. The M92 is made strong enough to use with smokeless loads. You are correct with the Saddle...

   Liked On: 24-03-2024, 05:46 PM

10. 
    Barefoot liked post by gundoc On thread : Advice about an 1892 Winchester

    Dies, .427" lead projectiles (NOT .429" as in other .44's), and cases are all fairly readily available. The M92 is made strong enough to use with smokeless loads. You are correct with the Saddle...

    Liked On: 24-03-2024, 05:42 PM

11. 
    erniec liked post by gundoc On thread : Advice about an 1892 Winchester

    Dies, .427" lead projectiles (NOT .429" as in other .44's), and cases are all fairly readily available. The M92 is made strong enough to use with smokeless loads. You are correct with the Saddle...

    Liked On: 24-03-2024, 05:05 PM

12. 
    jamie liked post by gundoc On thread : bsa sportsman ten feeding issue

    Sometimes rubbish gets trapped in the stock recess below the cartridge lifter. Take the stock off and check, cleaning as required. If you can see marks in the woodwork where the lifter sits when the...

    Liked On: 10-03-2024, 07:11 AM

13. 
    bluecod1967 liked post by gundoc On thread : bsa sportsman ten feeding issue

    Sometimes rubbish gets trapped in the stock recess below the cartridge lifter. Take the stock off and check, cleaning as required. If you can see marks in the woodwork where the lifter sits when the...

    Liked On: 09-03-2024, 08:28 PM

14. 
    Tentman liked post by gundoc On thread : bsa sportsman ten feeding issue

    Sometimes rubbish gets trapped in the stock recess below the cartridge lifter. Take the stock off and check, cleaning as required. If you can see marks in the woodwork where the lifter sits when the...

    Liked On: 09-03-2024, 08:26 PM

15. 
    308 liked post by gundoc On thread : MCM Margolin disassembly

    Hold the frame at the bottom of the grip and give the frame (where 02 is written) a sharp rap with the plastic handle end of a large screw driver and the plate will pop up. The same technique works...

    Liked On: 09-03-2024, 08:08 PM

Page 3 of 261 First 123456789101112131415161753103 ... Last

• Jump to page: