gundoc
Member

4190 Likes

Page 46 of 280 First ... 323334353637383940414243444546474849505152535455565758596096146 ... Last

• Jump to page:

1. 
   zimmer liked post by gundoc On thread : 30-40 Krag load conundrums

   165's with 39 grains of AR2219 (if you can find any) for 2400 fps. Bench Mark 2 is very similar in burning rate. 2213SC is safe to use up to 48 grains but will be about 250 fps slower.

   Liked On: 08-05-2023, 12:08 PM

2. 
   Eat Meater liked post by gundoc On thread : Legal length.

   How are you measuring it? The correct method is to measure from the muzzle to the toe of the butt to achieve the greatest measurement. A bare 762mm is legal. Do not measure parallel to the bore as it...

   Liked On: 29-04-2023, 09:24 PM

3. 
   tetawa liked post by gundoc On thread : Legal length.

   How are you measuring it? The correct method is to measure from the muzzle to the toe of the butt to achieve the greatest measurement. A bare 762mm is legal. Do not measure parallel to the bore as it...

   Liked On: 29-04-2023, 09:48 AM

4. 
   viper liked post by gundoc On thread : Legal length.

   How are you measuring it? The correct method is to measure from the muzzle to the toe of the butt to achieve the greatest measurement. A bare 762mm is legal. Do not measure parallel to the bore as it...

   Liked On: 29-04-2023, 07:13 AM

5. 
   timattalon liked post by gundoc On thread : Legal length.

   'Restricted Weapons' and 'Prohibited Firearms' are already subject to greater security precautions and vetting than 'Pistols'. The thrust of the Arms Act is to ensure only vetted people with...

   Liked On: 29-04-2023, 12:18 AM

6. 
   Mintie liked post by gundoc On thread : Legal length.

   'Restricted Weapons' and 'Prohibited Firearms' are already subject to greater security precautions and vetting than 'Pistols'. The thrust of the Arms Act is to ensure only vetted people with...

   Liked On: 28-04-2023, 10:51 PM

7. 
   Stocky liked post by gundoc On thread : Legal length.

   How are you measuring it? The correct method is to measure from the muzzle to the toe of the butt to achieve the greatest measurement. A bare 762mm is legal. Do not measure parallel to the bore as it...

   Liked On: 28-04-2023, 01:12 PM

8. 
   Sasquatch liked post by gundoc On thread : Legal length.

   How are you measuring it? The correct method is to measure from the muzzle to the toe of the butt to achieve the greatest measurement. A bare 762mm is legal. Do not measure parallel to the bore as it...

   Liked On: 28-04-2023, 12:46 PM

9. 
   SixtyTen liked post by gundoc On thread : Welding up/filling in screw holes on a P14 receiver.

   Countersink both sides of the holes, fit correct size steel screws to stick out about 3mm each side after the heads are cut off, peen both sides heavily against suitable anvils, then peen again at...

   Liked On: 23-04-2023, 05:05 PM

10. 
    Micky Duck liked post by gundoc On thread : Resized Cartridges Won't Chamber

    Definitely not a good practice as that effectively increases the headspace of the rifle.

    Liked On: 18-04-2023, 09:35 AM

11. 
    Micky Duck liked post by gundoc On thread : Resized Cartridges Won't Chamber

    Reloaded ammunition is usually firearm specific due to minute chamber differences. Resizing does not return cases to factory dimensions but merely ensures that the resized cases will fit the chamber...

    Liked On: 18-04-2023, 09:35 AM

12. 
    dannyb liked post by gundoc On thread : Resized Cartridges Won't Chamber

    Reloaded ammunition is usually firearm specific due to minute chamber differences. Resizing does not return cases to factory dimensions but merely ensures that the resized cases will fit the chamber...

    Liked On: 18-04-2023, 09:20 AM

13. 
    dannyb liked post by gundoc On thread : Resized Cartridges Won't Chamber

    Definitely not a good practice as that effectively increases the headspace of the rifle.

    Liked On: 18-04-2023, 09:20 AM

14. 
    Jaco Goosen liked post by gundoc On thread : Resized Cartridges Won't Chamber

    Reloaded ammunition is usually firearm specific due to minute chamber differences. Resizing does not return cases to factory dimensions but merely ensures that the resized cases will fit the chamber...

    Liked On: 18-04-2023, 09:06 AM

15. 
    shananah liked post by gundoc On thread : birchwood cold bluing turning to rust one week later

    Not only is rinsing with hot water needed to neutralize the residue after allowing to dry and carding with wire wool or 3M pad, but warming the part with boiling water before blueing helps get a...

    Liked On: 16-04-2023, 10:18 PM

Page 46 of 280 First ... 323334353637383940414243444546474849505152535455565758596096146 ... Last

• Jump to page: