After the guide screw holes were drilled (very carefully) and the rough profile cut out, it was time to get inletting. Topside complete 183996 183998 The bottom metal on these BSAs is a...
Liked On: 21-11-2021, 11:06 PM
182984 Not used often. Been in the family 80+ years, made late 1870s - early 1880s. 450 x 3.25" BPE Damascus Alex Henry barrels. Now shooting Nitro for Black loads with Woodleigh 350gr. It took a...
Liked On: 06-11-2021, 08:57 PM
gundoc you will need some of these 182908
Liked On: 06-11-2021, 09:57 AM
I have finally finished this "quick side project" more or less. I just need make a thread protector and to get a load that shoots ok. Bit hard at the moment being stuck in the middle of the suburbs....
Liked On: 30-10-2021, 05:16 AM
Hey guys, I've been pretty quiet on here of late, been pretty busy with work and family stuff, but I've managed to get out for a little bit of that all-important 'sanity' time we all need. A bit...
Liked On: 10-10-2021, 01:14 PM
Might be a bit old school for here so Admin can delete if ya want to, anyway here is an old Yeomanry carbine I bought back from a sorry state. Lucky a mate had a good one I could copy the missing...
Liked On: 02-10-2021, 09:05 PM
179209 Howdy This is my laminated welding table with a plasma table that slots in the rails.I got the slats punched out at work,they're 1.6 galv iron and seem pretty solid.I'll just wheel it...
Liked On: 20-09-2021, 09:39 PM
2 tyres, chain, round gong, some concrete. Suspend a round gong inside the farther away tyre. Collect spalled lead with no digging required. Anchoring the tyres with some rebar pegs may be...
Liked On: 27-08-2021, 12:29 PM
Ive been faffing around with a bunch of Lee Enfields of late, returning the best of them to full wood and parting out others etc. Its been a while since I did any work on these old girls and I wanted...
Liked On: 27-08-2021, 11:56 AM
Thought some good rifle porn was required while in lockdown , so let’s start a thread on Pre-war Oberndorf sporting rifles , I’m sure a few of you will have 1 or 2 lurking in the gun cabinet , this...
Liked On: 18-08-2021, 10:59 PM
Inletting of barrelled action and bottom metal has gone as far as I'm going to take it on the mill. Time to break out the inletting black and sharpen up the chisels and scrapers for the final...
Liked On: 09-07-2021, 02:42 PM
171791
Liked On: 06-07-2021, 06:27 PM
And lots of parts with it to work out like a jigsaw puzzle Also came with a huge magnetic table as it was being mainly used as a surface grinder 169420
Liked On: 05-06-2021, 10:42 AM
In nz about 150. Bought them from 75 up.
Liked On: 26-04-2021, 09:56 PM
Somewhere up Freshwater river Great image and it has a story to tell Someone will place it better from the shape of the distant ridge
Liked On: 19-04-2021, 02:42 PM