By "inletting" and setting the case in stock probably taken a fair bit of value off the item. Get's it heading for the "Bubba" section.
Liked On: 12-05-2022, 08:45 PM
Thanks Hermitage and Daniel Good to have some feed back and I will try the 8x30s and a rangefinder out. My current max range is 400m so dont need anything to extreme. The Leopold Yosemite 8x30...
Liked On: 03-05-2022, 08:38 PM
Then subtract the length of the ammo measured with a comparator, this gives you the length of the rifling Now you can see why the short mag (saum) looks so efficient in a short tube compared to...
Liked On: 27-04-2022, 10:42 AM
Its super easy on actions that have an excess gas port on the side which aligns with the bolt...
Liked On: 27-04-2022, 10:41 AM
This is correct. It is quite a bit shorter than the barrel looks. For instance, the OAL of a .308 cartridge is 2.800" (therabouts) so a 20" barrel will only have about 17" of rifling and bullet...
Liked On: 27-04-2022, 10:41 AM
Bolt face to muzzle.
Liked On: 26-04-2022, 07:42 PM
(As we have gone off topic for reloading.. mods feel free to put this somewhere more relevant...) Ok I think the problem has been somewhat identified... I took up Hunter_Nick 's generous...
Liked On: 26-04-2022, 07:38 PM
Maybe try contacting Bushnell international. Often manufacturers will direct local agents to come to the party to help protect their brand.
Liked On: 21-04-2022, 02:02 PM
What does the factory warranty state, NZ wholesalers are quite good at having their own version of "warranties" Have more than once found documentation with the item offering a longer warranty than...
Liked On: 21-04-2022, 02:01 PM
If you subscribe to barrel timing theory it’s likely due to the mv not being optimal for the barrel length. I use quickload and the barrel timing calculator for working up new loads. So far it has...
Liked On: 12-04-2022, 10:57 PM
Shortening it further will be a lottery unless the GS has the measuring equipment and skill to use it.
Liked On: 12-04-2022, 09:36 PM
Accuracy has a degree of alchemy involved. There are rules and exceptions that prove the rule. Some barrels with twist rates that are theoretically too slow still shoot very accurately with...
Liked On: 12-04-2022, 09:36 PM
Even the finest barrelmakers will have variation in the bore and land dimensions, and no barrel is perfectly straight. So when a knowlegable gunsmith seeking the finest accuracy shortens a barrel...
Liked On: 12-04-2022, 09:16 PM
Some guesses that could effect accuracy after a barrel chop, 1) Harmonics of the whole system has changed. With the shorter barrel the projectile may be exiting when the barrel is at a different...
Liked On: 12-04-2022, 09:02 PM
One mans Freedom Fighter is another mans Terrorist
Liked On: 27-03-2022, 08:46 PM