SPF works great in some calibres and not so much in others. Bloody amazing in a 270. When you find a good load, just be a little careful using it in summer, I have found it is somewhat more temp...
Liked On: 13-02-2022, 07:14 PM
Yep, Superformance is a great choice for 284. I use it running 160TMKs @ 2830fps out of 20in bbl. Sweet spot for me was in the 56-56.5 gn range, but work up carefully from lower in your rifle
Liked On: 13-02-2022, 06:22 PM
show off :oh noes:
Liked On: 13-02-2022, 05:31 PM
As some already know I have been trialing every infiRay (iRay) Thermal that I can lay my hands on lately My earlier prediction of the iRay been a good option for entry level Thermal has not been...
Liked On: 09-12-2021, 09:47 AM
When you see his grin you can tell he’s as crazy as the Duleys :D
Liked On: 22-03-2021, 03:00 PM
Good show guys. I must admit my stubborn-ness turned me off you Greg for a bit after I had an "Internet argument" with you a few years back about the ability of hinds to carry genetics. But I've...
Liked On: 18-02-2021, 04:35 PM
Emil, that is a stag and a half in my opinion, well done as you are the unsung hero of the show. Great work all round.
Liked On: 18-02-2021, 04:33 PM
https://uploads.tapatalk-cdn.com/20201001/2071c482ddf43a8991a732ba26a4dd23.jpg Sent from my iPad using Tapatalk
Liked On: 02-10-2020, 12:35 PM
FIRST GO AT A FIBERGLASS STOCK With the mold complete it was now time to bite the bullet and have a go at making my first rifle stock. As I previously mentioned I had decided that I would make my...
Liked On: 02-09-2020, 11:25 AM
Ive found the best method for all my wildcats/Ackley's etc is a full to the brim case of Trailboss then stab it into a candle to seal with a plug of wax. Most cases will form fully this way and its...
Liked On: 21-08-2020, 04:11 PM
I’ve had really good success forming, for example, 30 Gibbs from either 270 or 30-06 brass using something like AR2205, oatbran as a filler and then stabbing the neck into a candle and breaking it...
Liked On: 21-08-2020, 04:11 PM
The hydraulic die is almost just as time consuming and a bit messy with water everywhere and you need to dry the cases in an oven or I use my dehydrator after forming. And to be fair I still don't...
Liked On: 21-08-2020, 04:11 PM
I've used the cream of wheat method and a few others but I found just using a standard load the best they still shoot accurate and are good for steel shoots or hunting. Sent from my CPH1903 using...
Liked On: 21-08-2020, 04:11 PM
If you want good conformity of the brass to your chamber, you really want to use a projectile and get it jammed into the lands, so that the case base is tight against the bolt face. That way you get...
Liked On: 21-08-2020, 04:11 PM
Yeah hundreds of times but it is not as good as hydraulic dies or just fire forming. Maybe I was getting it wrong but I never achieved a perfect case with a patch or other type of filler. Just used...
Liked On: 21-08-2020, 04:11 PM