homebrew.357
Member

1244 Likes

Page 69 of 83 First ... 195556575859606162636465666768697071727374757677787980818283 Last

• Jump to page:

1. 
   Bryan liked post by homebrew.357 On thread : Hawkins plains rifle project

   No wont, :XD:, because it`s not, so will close this thread with thanks for your words and support and will be posting a new one soon. And speaking of threads this is what I`m making for my new rifle,...

   Liked On: 14-03-2015, 10:12 PM

2. 
   kotuku liked post by homebrew.357 On thread : Hawkins plains rifle project

   Hi all, I think I`v got it right, I have re reamed the barrel out to .430" I D made up a new rifling head cutter and re cut the rifling 0.010" deep so it is .450" cal. Then honed and lapped the bore...

   Liked On: 12-03-2015, 06:02 PM

3. 
   john m liked post by homebrew.357 On thread : Hawkins plains rifle project

   Hi all, I think I`v got it right, I have re reamed the barrel out to .430" I D made up a new rifling head cutter and re cut the rifling 0.010" deep so it is .450" cal. Then honed and lapped the bore...

   Liked On: 12-03-2015, 02:41 PM

4. 
   john m liked post by homebrew.357 On thread : Hawkins plains rifle project

   12582

   Liked On: 12-03-2015, 02:30 PM

5. 
   Marty Henry liked post by homebrew.357 On thread : Hawkins plains rifle project

   12580

   Liked On: 12-03-2015, 01:08 PM

6. 
   veitnamcam liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Well you will have to wait guys, I have just got my call up for my final hip op, about six weeks on crutches and sitting around. I know, will look at making a gun cover with bead work on it, Cheers,...

   Liked On: 20-02-2015, 10:34 PM

7. 
   Tommy liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Well you will have to wait guys, I have just got my call up for my final hip op, about six weeks on crutches and sitting around. I know, will look at making a gun cover with bead work on it, Cheers,...

   Liked On: 20-02-2015, 08:39 PM

8. 
   Shootm liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi .303 guy, I suppose there`s a lot of ways of doing this , like a sine ways rifling bar, just have to look on the internet for ideas. I just got lucky with my gearbox and bike bits , and the end...

   Liked On: 08-02-2015, 08:54 PM

9. 
   Shootm liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi Guys, Hope you had a good xmas and put a dent in the brown ale supply, I need three homebrew kits at least to stock up my supply. Have done a bit more to my Sharps barrel, octagonal finished and...

   Liked On: 08-02-2015, 08:54 PM

10. 
    ishoot10s liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Just couldn`t stand the suspense of not knowing what my new mould would cast out at, so had a bit of lead casting today. Results, .463"dia, and the double cavity mould cast one at 425grs, and one at...

    Liked On: 07-02-2015, 07:30 AM

11. 
    Toby liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi .303 guy, I suppose there`s a lot of ways of doing this , like a sine ways rifling bar, just have to look on the internet for ideas. I just got lucky with my gearbox and bike bits , and the end...

    Liked On: 06-02-2015, 08:44 PM

12. 
    Toby liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Just couldn`t stand the suspense of not knowing what my new mould would cast out at, so had a bit of lead casting today. Results, .463"dia, and the double cavity mould cast one at 425grs, and one at...

    Liked On: 06-02-2015, 08:43 PM

13. 
    EeeBees liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Just couldn`t stand the suspense of not knowing what my new mould would cast out at, so had a bit of lead casting today. Results, .463"dia, and the double cavity mould cast one at 425grs, and one at...

    Liked On: 06-02-2015, 08:07 PM

14. 
    Gibo liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Just couldn`t stand the suspense of not knowing what my new mould would cast out at, so had a bit of lead casting today. Results, .463"dia, and the double cavity mould cast one at 425grs, and one at...

    Liked On: 04-02-2015, 09:22 AM

15. 
    Shootm liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Just couldn`t stand the suspense of not knowing what my new mould would cast out at, so had a bit of lead casting today. Results, .463"dia, and the double cavity mould cast one at 425grs, and one at...

    Liked On: 03-02-2015, 08:35 PM

Page 69 of 83 First ... 195556575859606162636465666768697071727374757677787980818283 Last

• Jump to page: