homebrew.357
Member

1244 Likes

Page 41 of 83 First ... 2728293031323334353637383940414243444546474849505152535455 ... Last

• Jump to page:

1. 
   Shootm liked post by homebrew.357 On thread : Rifling thinge upgrade.

   Well bugger me days, obviously Chop3r you know your top off the line measuring stuff, those pegs are my twist ratio guides. One is touching the one on the rifling shaft , the crank handle is turned...

   Liked On: 15-08-2017, 06:54 AM

2. 
   madjon_ liked post by homebrew.357 On thread : Rifling thinge upgrade.

   Well bugger me days, obviously Chop3r you know your top off the line measuring stuff, those pegs are my twist ratio guides. One is touching the one on the rifling shaft , the crank handle is turned...

   Liked On: 14-08-2017, 12:43 AM

3. 
   A330driver liked post by homebrew.357 On thread : Rifling thinge upgrade.

   Hi all, Had a rethink on my barrel rifling setup as I could only cut rifle a left hand twist, so using the sine bar method I can now get a twist from 1-18 to 1-70" and right hand!!. I had a meter of...

   Liked On: 13-08-2017, 04:51 PM

4. 
   kotuku liked post by homebrew.357 On thread : Rifling thinge upgrade.

   I know it`s all sorts of bits and pieces, but I just use comeinhandy bits like an old tap handle to adjust the shaft up and down to change the twist rate at the back of my lathe. Hi Kotuku old mate,...

   Liked On: 12-08-2017, 08:40 AM

5. 
   northdude liked post by homebrew.357 On thread : Rifling thinge upgrade.

   Took me a bit to work it out and a few small bearings on the slider got things working, had to make the small sprocket to get the right ratio and now its working a treat. Will have go at doing a few...

   Liked On: 10-08-2017, 07:35 AM

6. 
   res liked post by homebrew.357 On thread : Rifling thinge upgrade.

   Hi all, Had a rethink on my barrel rifling setup as I could only cut rifle a left hand twist, so using the sine bar method I can now get a twist from 1-18 to 1-70" and right hand!!. I had a meter of...

   Liked On: 10-08-2017, 12:13 AM

7. 
   Tommy liked post by homebrew.357 On thread : Rifling thinge upgrade.

   Took me a bit to work it out and a few small bearings on the slider got things working, had to make the small sprocket to get the right ratio and now its working a treat. Will have go at doing a few...

   Liked On: 09-08-2017, 09:11 PM

8. 
   Beaker liked post by homebrew.357 On thread : Rifling thinge upgrade.

   Took me a bit to work it out and a few small bearings on the slider got things working, had to make the small sprocket to get the right ratio and now its working a treat. Will have go at doing a few...

   Liked On: 09-08-2017, 08:44 PM

9. 
   R93 liked post by homebrew.357 On thread : Rifling thinge upgrade.

   Hi all, Had a rethink on my barrel rifling setup as I could only cut rifle a left hand twist, so using the sine bar method I can now get a twist from 1-18 to 1-70" and right hand!!. I had a meter of...

   Liked On: 09-08-2017, 07:04 PM

10. 
    Marty Henry liked post by homebrew.357 On thread : 45/70 Subsonic

    OK OK , I googled it, hell if the old buff hunters had that they would have wiped out the buffalo's in a week. Just shows you it`s gone the full round from .223 back to the old 45-70, sort of, all...

    Liked On: 04-08-2017, 12:38 PM

11. 
    Micky Duck liked post by homebrew.357 On thread : 45/70 Subsonic

    OK OK , I googled it, hell if the old buff hunters had that they would have wiped out the buffalo's in a week. Just shows you it`s gone the full round from .223 back to the old 45-70, sort of, all...

    Liked On: 30-07-2017, 09:50 PM

12. 
    Biggun708 liked post by homebrew.357 On thread : BOP get together - take a young fella hunting weekend. ...

    For health and safety reasons Gapped Axe, you would be wise not to camp any where near my caravan, after a feed of pickled mussels and a few jugs of my home brew I`m a dead sert to take over the maui...

    Liked On: 30-07-2017, 09:22 PM

13. 
    john m liked post by homebrew.357 On thread : BOP get together - take a young fella hunting weekend. ...

    It`s Amazing how it goes' off track, so coming down form A K L, it will take me 4/5 hours towing the caravan, a long trip for just a weekend, so to make it worth while I will be heading down on the...

    Liked On: 29-07-2017, 12:10 AM

14. 
    Biggun708 liked post by homebrew.357 On thread : BOP get together - take a young fella hunting weekend. ...

    It`s Amazing how it goes' off track, so coming down form A K L, it will take me 4/5 hours towing the caravan, a long trip for just a weekend, so to make it worth while I will be heading down on the...

    Liked On: 28-07-2017, 10:54 PM

15. 
    Paddy79 liked post by homebrew.357 On thread : BOP get together - take a young fella hunting weekend. ...

    It`s Amazing how it goes' off track, so coming down form A K L, it will take me 4/5 hours towing the caravan, a long trip for just a weekend, so to make it worth while I will be heading down on the...

    Liked On: 28-07-2017, 09:40 PM

Page 41 of 83 First ... 2728293031323334353637383940414243444546474849505152535455 ... Last

• Jump to page: