homebrew.357
Member

1244 Likes

Page 56 of 83 First ... 64243444546474849505152535455565758596061626364656667686970 ... Last

• Jump to page:

1. 
   Scouser liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi, So with a bit of careful inletting the trigger plate assemble fits in nice and snug, and all I`v got to do is fit in the rest of it with no mistakes. :o. It will be a tricky job, but now I have a...

   Liked On: 12-01-2016, 07:54 AM

2. 
   Scouser liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi, I was trying my idea of how to acid etch the side plate, off cause me being an electroplater no problem. My idea was to use a battery charger to do the etching, so I spray painted a test piece...

   Liked On: 12-01-2016, 07:51 AM

3. 
   Scouser liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi Guys, I am still doing some bits on the rifle, mainly the stock wood fitting form the black walnut I got. Have roughly cut out the stock and forearm bits and fitting the forearm first, I cut it to...

   Liked On: 12-01-2016, 07:50 AM

4. 
   Mathias liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   And the finale bit of finishing on the stock and sanded with 220grit paper ready for oiling. Cheers, Homebrew.357. PS, Yes, I`m really. going on holiday. :cool: 44539, Final shape. 44540, last...

   Liked On: 11-01-2016, 09:36 PM

5. 
   Maca49 liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   And to prove it`s not a cockup here are pics of it so far, fitted the butt plate on and then really got into carving out the stock shape, well to my idea of it. Have finished it and just needs a...

   Liked On: 11-01-2016, 09:15 PM

6. 
   Maca49 liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   It`s not a cockup !,:XD: Happy new year,:thumbsup:, just a bit stronger and just getting all the metal bits to fit in the stock. I like to fit it all in before carving out the stock shape so there`s...

   Liked On: 11-01-2016, 09:14 PM

7. 
   Tommy liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   And the finale bit of finishing on the stock and sanded with 220grit paper ready for oiling. Cheers, Homebrew.357. PS, Yes, I`m really. going on holiday. :cool: 44539, Final shape. 44540, last...

   Liked On: 11-01-2016, 09:04 PM

8. 
   Tommy liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   That's absolutely cheating!!, :omg:, you lazy sod, :yuush:, it`s so unfear, post it up to me so I can check if mine is the same, :P. and so I can find out how they shoot!!!, :). You lucky sod, you...

   Liked On: 11-01-2016, 08:59 PM

9. 
   res liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   And the finale bit of finishing on the stock and sanded with 220grit paper ready for oiling. Cheers, Homebrew.357. PS, Yes, I`m really. going on holiday. :cool: 44539, Final shape. 44540, last...

   Liked On: 11-01-2016, 08:44 PM

10. 
    Beaker liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    And the finale bit of finishing on the stock and sanded with 220grit paper ready for oiling. Cheers, Homebrew.357. PS, Yes, I`m really. going on holiday. :cool: 44539, Final shape. 44540, last...

    Liked On: 11-01-2016, 08:41 PM

11. 
    res liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    And to prove it`s not a cockup here are pics of it so far, fitted the butt plate on and then really got into carving out the stock shape, well to my idea of it. Have finished it and just needs a...

    Liked On: 11-01-2016, 08:12 PM

12. 
    Savage1 liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    It`s not a cockup !,:XD: Happy new year,:thumbsup:, just a bit stronger and just getting all the metal bits to fit in the stock. I like to fit it all in before carving out the stock shape so there`s...

    Liked On: 05-01-2016, 10:07 PM

13. 
    Beaker liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    It`s not a cockup !,:XD: Happy new year,:thumbsup:, just a bit stronger and just getting all the metal bits to fit in the stock. I like to fit it all in before carving out the stock shape so there`s...

    Liked On: 02-01-2016, 09:38 PM

14. 
    veitnamcam liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    It`s not a cockup !,:XD: Happy new year,:thumbsup:, just a bit stronger and just getting all the metal bits to fit in the stock. I like to fit it all in before carving out the stock shape so there`s...

    Liked On: 02-01-2016, 06:10 PM

15. 
    Blaser liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    It`s not a cockup !,:XD: Happy new year,:thumbsup:, just a bit stronger and just getting all the metal bits to fit in the stock. I like to fit it all in before carving out the stock shape so there`s...

    Liked On: 02-01-2016, 12:17 PM

Page 56 of 83 First ... 64243444546474849505152535455565758596061626364656667686970 ... Last

• Jump to page: