homebrew.357
Member

1244 Likes

Page 59 of 83 First ... 94546474849505152535455565758596061626364656667686970717273 ... Last

• Jump to page:

1. 
   Beaker liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Flaming heck, I knew this would happen,:omg: Spanners you will have to move to the back of the queue and I`m going to stock up on old washing machine parts and bike chain plus sprockets so I can go...

   Liked On: 15-11-2015, 09:25 PM

2. 
   grunzter liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi guys, A bit more, After milling the flat I had to mill a slot for the ejector as well then it would close in when the breech was closed. When all was working I tried a case and it ejected...

   Liked On: 06-11-2015, 10:08 PM

3. 
   veitnamcam liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi guys, A bit more, After milling the flat I had to mill a slot for the ejector as well then it would close in when the breech was closed. When all was working I tried a case and it ejected...

   Liked On: 30-10-2015, 04:01 PM

4. 
   kimjon liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi guys, A bit more, After milling the flat I had to mill a slot for the ejector as well then it would close in when the breech was closed. When all was working I tried a case and it ejected...

   Liked On: 29-10-2015, 09:20 PM

5. 
   kimjon liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Flaming heck, I knew this would happen,:omg: Spanners you will have to move to the back of the queue and I`m going to stock up on old washing machine parts and bike chain plus sprockets so I can go...

   Liked On: 29-10-2015, 09:20 PM

6. 
   mikee liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi guys, A bit more, After milling the flat I had to mill a slot for the ejector as well then it would close in when the breech was closed. When all was working I tried a case and it ejected...

   Liked On: 21-10-2015, 08:41 PM

7. 
   kimjon liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   So after cutting the slot for the ejector I had to fit it, and with a bit of grinding, filing I finally got I to work. Now the breech end of the barrel has a flat on the side and a milled cross slot...

   Liked On: 20-10-2015, 09:18 PM

8. 
   Savage1 liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi guys, I feel a bit like Nasa, When after all the hard work men finally stood on the moon, witch means I have busted some primers in this rifle, so the firing pin is working, after some twigging...

   Liked On: 13-10-2015, 11:52 AM

9. 
   Toby liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi guys, I feel a bit like Nasa, When after all the hard work men finally stood on the moon, witch means I have busted some primers in this rifle, so the firing pin is working, after some twigging...

   Liked On: 12-10-2015, 08:49 PM

10. 
    Haggie liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi guys, I feel a bit like Nasa, When after all the hard work men finally stood on the moon, witch means I have busted some primers in this rifle, so the firing pin is working, after some twigging...

    Liked On: 10-10-2015, 07:43 PM

11. 
    veitnamcam liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi guys, I feel a bit like Nasa, When after all the hard work men finally stood on the moon, witch means I have busted some primers in this rifle, so the firing pin is working, after some twigging...

    Liked On: 10-10-2015, 07:16 AM

12. 
    kimjon liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi guys, I feel a bit like Nasa, When after all the hard work men finally stood on the moon, witch means I have busted some primers in this rifle, so the firing pin is working, after some twigging...

    Liked On: 10-10-2015, 07:11 AM

13. 
    Bryan liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi guys, I feel a bit like Nasa, When after all the hard work men finally stood on the moon, witch means I have busted some primers in this rifle, so the firing pin is working, after some twigging...

    Liked On: 09-10-2015, 10:06 PM

14. 
    kimjon liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Now that would make the brew full of a few hormones, :wtfsmilie:, Looking at my waste line, mmmmmm, mind it`s been like this for a few years now, so I don`t think I've go that problem. Into a bit of...

    Liked On: 09-10-2015, 07:47 PM

15. 
    veitnamcam liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Now that would make the brew full of a few hormones, :wtfsmilie:, Looking at my waste line, mmmmmm, mind it`s been like this for a few years now, so I don`t think I've go that problem. Into a bit of...

    Liked On: 08-10-2015, 08:18 PM

Page 59 of 83 First ... 94546474849505152535455565758596061626364656667686970717273 ... Last

• Jump to page: