homebrew.357
Member

1244 Likes

Page 63 of 83 First ... 134950515253545556575859606162636465666768697071727374757677 ... Last

• Jump to page:

1. 
   Gibo liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi, Cutting out a slot first helped with the round nose mill as it was not cutting a large area , but still cut it nice and slowly. The cutter running at centre milled a final slot size of .725" ,...

   Liked On: 12-08-2015, 02:54 PM

2. 
   kimjon liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi, Cutting out a slot first helped with the round nose mill as it was not cutting a large area , but still cut it nice and slowly. The cutter running at centre milled a final slot size of .725" ,...

   Liked On: 11-08-2015, 09:58 PM

3. 
   Beaker liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi, Cutting out a slot first helped with the round nose mill as it was not cutting a large area , but still cut it nice and slowly. The cutter running at centre milled a final slot size of .725" ,...

   Liked On: 11-08-2015, 09:44 PM

4. 
   Bryan liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi, Cutting out a slot first helped with the round nose mill as it was not cutting a large area , but still cut it nice and slowly. The cutter running at centre milled a final slot size of .725" ,...

   Liked On: 11-08-2015, 09:16 PM

5. 
   Blaser liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi, Cutting out a slot first helped with the round nose mill as it was not cutting a large area , but still cut it nice and slowly. The cutter running at centre milled a final slot size of .725" ,...

   Liked On: 11-08-2015, 09:11 PM

6. 
   veitnamcam liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi, Cutting out a slot first helped with the round nose mill as it was not cutting a large area , but still cut it nice and slowly. The cutter running at centre milled a final slot size of .725" ,...

   Liked On: 11-08-2015, 08:55 PM

7. 
   kimjon liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   A bit more work on the receiver, milled to final size the back sloping bit under the tang, a bit of a mission, had to use a long I" boring bar, but with small cuts and going nice and slowly I got...

   Liked On: 07-08-2015, 10:28 PM

8. 
   kotuku liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi guys, Finally a break through in this build, yes, the breech block and lever are the sweetest fitting things I have made , move snug and firm. Hay, this gun may really get to work, I know I had a...

   Liked On: 02-08-2015, 03:36 PM

9. 
   veitnamcam liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi guys, Finally a break through in this build, yes, the breech block and lever are the sweetest fitting things I have made , move snug and firm. Hay, this gun may really get to work, I know I had a...

   Liked On: 01-08-2015, 01:36 AM

10. 
    kimjon liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi guys, Finally a break through in this build, yes, the breech block and lever are the sweetest fitting things I have made , move snug and firm. Hay, this gun may really get to work, I know I had a...

    Liked On: 31-07-2015, 05:23 PM

11. 
    Blaser liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi guys, Finally a break through in this build, yes, the breech block and lever are the sweetest fitting things I have made , move snug and firm. Hay, this gun may really get to work, I know I had a...

    Liked On: 31-07-2015, 02:18 PM

12. 
    res liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi guys, Finally a break through in this build, yes, the breech block and lever are the sweetest fitting things I have made , move snug and firm. Hay, this gun may really get to work, I know I had a...

    Liked On: 31-07-2015, 11:51 AM

13. 
    Toby liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi guys, Finally a break through in this build, yes, the breech block and lever are the sweetest fitting things I have made , move snug and firm. Hay, this gun may really get to work, I know I had a...

    Liked On: 31-07-2015, 08:32 AM

14. 
    Beaker liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi guys, Finally a break through in this build, yes, the breech block and lever are the sweetest fitting things I have made , move snug and firm. Hay, this gun may really get to work, I know I had a...

    Liked On: 30-07-2015, 11:40 PM

15. 
    Bryan liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi guys, Finally a break through in this build, yes, the breech block and lever are the sweetest fitting things I have made , move snug and firm. Hay, this gun may really get to work, I know I had a...

    Liked On: 30-07-2015, 10:25 PM

Page 63 of 83 First ... 134950515253545556575859606162636465666768697071727374757677 ... Last

• Jump to page: