Hunter_Nick
Member

1363 Likes

Page 67 of 91 First ... 175354555657585960616263646566676869707172737475767778798081 ... Last

• Jump to page:

1. 
   Forestry liked post by Hunter_Nick On thread : Accuracy expectations

   Well, finally cracked the code and have the 6x45 performing as it should be. Fast and accurate. Shot a couple of groups working up a new load, and both easily 1/2 MOA with this one making 0.3 MOA....

   Liked On: 07-01-2022, 12:00 AM

2. 
   ANTSMAN liked post by Hunter_Nick On thread : Walnut and blued steel,

   149164149165 BSA Regent .222 Recent purchase, just in the process of a quick tidy up. Done a heap of work and the barrel is tired, so going to re-barrel to .222 or my favourite- 6x45

   Liked On: 05-01-2022, 11:48 AM

3. 
   Trout liked post by Hunter_Nick On thread : Accuracy expectations

   Well, finally cracked the code and have the 6x45 performing as it should be. Fast and accurate. Shot a couple of groups working up a new load, and both easily 1/2 MOA with this one making 0.3 MOA....

   Liked On: 28-12-2021, 08:52 PM

4. 
   Micky Duck liked post by Hunter_Nick On thread : Accuracy expectations

   Well, finally cracked the code and have the 6x45 performing as it should be. Fast and accurate. Shot a couple of groups working up a new load, and both easily 1/2 MOA with this one making 0.3 MOA....

   Liked On: 28-12-2021, 06:28 PM

5. 
   jakewire liked post by Hunter_Nick On thread : Accuracy expectations

   Well, finally cracked the code and have the 6x45 performing as it should be. Fast and accurate. Shot a couple of groups working up a new load, and both easily 1/2 MOA with this one making 0.3 MOA....

   Liked On: 28-12-2021, 05:26 PM

6. 
   Russian 22. liked post by Hunter_Nick On thread : bedding issues

   Looks like the whole action is not seated deep enough in the stock to me. The bottom line of the ejection port is parallel to the stock, so I think both front and rear need to be relieved so the...

   Liked On: 28-12-2021, 01:34 PM

7. 
   BSA270 liked post by Hunter_Nick On thread : Modern scopes on older rifles

   I’ve found the Leupolds ok to fit on my older BSAs. In Parker Hale rings which are pretty damn low, bolt handle clearance is ok, but not much in it! That’s basically the reason I keep going back to...

   Liked On: 27-12-2021, 04:36 PM

8. 
   Tuidog liked post by Hunter_Nick On thread : Modern scopes on older rifles

   I’ve found the Leupolds ok to fit on my older BSAs. In Parker Hale rings which are pretty damn low, bolt handle clearance is ok, but not much in it! That’s basically the reason I keep going back to...

   Liked On: 27-12-2021, 12:07 PM

9. 
   Micky Duck liked post by Hunter_Nick On thread : Modern scopes on older rifles

   I’ve found the Leupolds ok to fit on my older BSAs. In Parker Hale rings which are pretty damn low, bolt handle clearance is ok, but not much in it! That’s basically the reason I keep going back to...

   Liked On: 25-12-2021, 10:36 AM

10. 
    caberslash liked post by Hunter_Nick On thread : Modern scopes on older rifles

    I’ve found the Leupolds ok to fit on my older BSAs. In Parker Hale rings which are pretty damn low, bolt handle clearance is ok, but not much in it! That’s basically the reason I keep going back to...

    Liked On: 24-12-2021, 04:18 AM

11. 
    tim37 liked post by Hunter_Nick On thread : Zastava .223 follower spring

    +1 on this. I used one to replace one for my BSA Hunter 6x45. A few adjustments and it was good to go. I reckon it would drop in to a zastava, I have one too and they’re very similar

    Liked On: 23-12-2021, 05:50 PM

12. 
    Moa Hunter liked post by Hunter_Nick On thread : 6x45 Rem barrel

    185988 More success with the 6x45 a couple of nights ago. Took this yearling stag at about 150yds with a 70gr Nosler ballistic tip launched at 2950fps. To say I’m stoked with the bullet...

    Liked On: 17-12-2021, 08:28 PM

13. 
    257weatherby liked post by Hunter_Nick On thread : 6x45 Rem barrel

    A little more info for those interested in the 6x45. I cut the base off a few different 6mm projectiles, and melted the lead out in order to measure jacket thickness. I also Measured the hollow...

    Liked On: 17-12-2021, 07:31 PM

14. 
    Tommy liked post by Hunter_Nick On thread : 6x45 Rem barrel

    185988 More success with the 6x45 a couple of nights ago. Took this yearling stag at about 150yds with a 70gr Nosler ballistic tip launched at 2950fps. To say I’m stoked with the bullet...

    Liked On: 16-12-2021, 10:23 AM

15. 
    Mathias liked post by Hunter_Nick On thread : 6x45 Rem barrel

    185988 More success with the 6x45 a couple of nights ago. Took this yearling stag at about 150yds with a 70gr Nosler ballistic tip launched at 2950fps. To say I’m stoked with the bullet...

    Liked On: 16-12-2021, 10:07 AM

Page 67 of 91 First ... 175354555657585960616263646566676869707172737475767778798081 ... Last

• Jump to page: