I have a couple of BAR's myself (a Mark II lightweight in 308 and a Shorttrac in 7mm WSM). Both of mine shoot very well (about 1 MOA or slightly less with loads they like - closer to 2" with loads...
Liked On: 06-02-2017, 03:24 PM
I have a couple of BAR's myself (a Mark II lightweight in 308 and a Shorttrac in 7mm WSM). Both of mine shoot very well (about 1 MOA or slightly less with loads they like - closer to 2" with loads...
Liked On: 06-02-2017, 02:43 PM
I have a couple of BAR's myself (a Mark II lightweight in 308 and a Shorttrac in 7mm WSM). Both of mine shoot very well (about 1 MOA or slightly less with loads they like - closer to 2" with loads...
Liked On: 06-02-2017, 02:30 PM
I own a H&K 300 which is superb - very accurate and reliable german engineering. It will on average (i.e. not my best groups) shoot a little over 0.5MOA at 100 metres with Hornady V-max ammunition. ...
Liked On: 13-05-2016, 07:51 PM
Hi there; I have recently bought a Husqvarna Model 46 in 9.3x57. Quite a neat rifle. 40015 Does anyone have some suggested starting loads - preferably using ADI powders. I have managed to...
Liked On: 29-08-2015, 06:52 PM
Hi there; I have recently bought a Husqvarna Model 46 in 9.3x57. Quite a neat rifle. 40015 Does anyone have some suggested starting loads - preferably using ADI powders. I have managed to...
Liked On: 26-08-2015, 08:18 PM
Hi there; I have recently bought a Husqvarna Model 46 in 9.3x57. Quite a neat rifle. 40015 Does anyone have some suggested starting loads - preferably using ADI powders. I have managed to...
Liked On: 25-08-2015, 10:49 PM
On mine I carefully filed the bolt handle right down myself (and then had it professionally reblued). I sourced a set of conetrol bases from Richard Wilhems and then used a super low set of conetrol...
Liked On: 22-08-2015, 08:59 PM
On mine I carefully filed the bolt handle right down myself (and then had it professionally reblued). I sourced a set of conetrol bases from Richard Wilhems and then used a super low set of conetrol...
Liked On: 22-08-2015, 08:38 PM
On mine I carefully filed the bolt handle right down myself (and then had it professionally reblued). I sourced a set of conetrol bases from Richard Wilhems and then used a super low set of conetrol...
Liked On: 22-08-2015, 07:40 PM
If it helps, by way of comparison I own VXIII's in 1.5-5x (x2), 1.75-6x, 2.5-8x, 3.5-10x (x3 all with CDS) and 4.5-14x (both x40 and x50 versions one with CDS and one with M4 turrets). In terms of...
Liked On: 15-08-2015, 09:08 PM
If it helps, by way of comparison I own VXIII's in 1.5-5x (x2), 1.75-6x, 2.5-8x, 3.5-10x (x3 all with CDS) and 4.5-14x (both x40 and x50 versions one with CDS and one with M4 turrets). In terms of...
Liked On: 15-08-2015, 08:57 PM
If it helps, by way of comparison I own VXIII's in 1.5-5x (x2), 1.75-6x, 2.5-8x, 3.5-10x (x3 all with CDS) and 4.5-14x (both x40 and x50 versions one with CDS and one with M4 turrets). In terms of...
Liked On: 15-08-2015, 08:44 AM
I have also bought a couple back in carry-on hand luggage. I ended up being questioned by a reasonably intense Australian customs officer and wiped/tested for explosives. Fortunately another...
Liked On: 15-04-2015, 07:20 PM
In my view, there are basically three different categories (yes this is a gross generalisation, but it might help): 1) Post 64 (non comemorative) - the quality control in these is variable and...
Liked On: 20-10-2013, 07:57 PM