Husky1600
Member

1501 Likes

Page 21 of 101 First ... 789101112131415161718192021222324252627282930313233343571 ... Last

• Jump to page:

1. 
   Moa Hunter liked post by Husky1600 On thread : First time reloading 270win

   I lube the inside of all my necks - originally with graphite, simply dipped in a small pottle of it. And lately using the RCBS lube on a brush rolled over the lube pad. Sidetrack, when you lower...

   Liked On: 29-07-2022, 07:32 PM

2. 
   Moa Hunter liked post by Husky1600 On thread : First time reloading 270win

   These are the shell holders needed for the 270 - 202439202440

   Liked On: 29-07-2022, 07:28 PM

3. 
   Moa Hunter liked post by Husky1600 On thread : First time reloading 270win

   I once had a similar problem, no matter how hard I cranked that die down it wouldn't chamber nicely. One issue was I was using a Hornady shell holder with RCBS dies or maybe and RCBS shell holder...

   Liked On: 29-07-2022, 07:27 PM

4. 
   Longrun liked post by Husky1600 On thread : First time reloading 270win

   I once had a similar problem, no matter how hard I cranked that die down it wouldn't chamber nicely. One issue was I was using a Hornady shell holder with RCBS dies or maybe and RCBS shell holder...

   Liked On: 29-07-2022, 06:50 PM

5. 
   Micky Duck liked post by Husky1600 On thread : First time reloading 270win

   I once had a similar problem, no matter how hard I cranked that die down it wouldn't chamber nicely. One issue was I was using a Hornady shell holder with RCBS dies or maybe and RCBS shell holder...

   Liked On: 27-07-2022, 07:27 PM

6. 
   Micky Duck liked post by Husky1600 On thread : 3D Printing

   The RCBS ones are great, about the right size so as not to take up too much room on the reloading bench. They have lots of holes - 80, every second one is for large rifle/magnum, and every other...

   Liked On: 24-07-2022, 03:00 PM

7. 
   Micky Duck liked post by Husky1600 On thread : First time reloading 270win

   Chamber may appear tighter because your die is set for the previous rifle. Go back to basic's and set your resizing die so the your cases chamber "nicely". That may even mean you have to set the die...

   Liked On: 24-07-2022, 11:42 AM

8. 
   Micky Duck liked post by Husky1600 On thread : First time reloading 270win

   Each rifle is different, tighter is probably the easiest way to describe it. Shouldn't affect pressure, but it does mean that your die has to be set to that rifle/chamber. Easy to follow instructions...

   Liked On: 24-07-2022, 11:40 AM

9. 
   Sidetrack liked post by Husky1600 On thread : First time reloading 270win

   Chamber may appear tighter because your die is set for the previous rifle. Go back to basic's and set your resizing die so the your cases chamber "nicely". That may even mean you have to set the die...

   Liked On: 24-07-2022, 11:10 AM

10. 
    dannyb liked post by Husky1600 On thread : First time reloading 270win

    Chamber may appear tighter because your die is set for the previous rifle. Go back to basic's and set your resizing die so the your cases chamber "nicely". That may even mean you have to set the die...

    Liked On: 24-07-2022, 11:06 AM

11. 
    ROKTOY liked post by Husky1600 On thread : Great to teach an enthusiastic youngster

    Cool post, well done, thank you for taking the time to mentor the young fella.

    Liked On: 22-07-2022, 09:18 PM

12. 
    Fssprecision liked post by Husky1600 On thread : Great to teach an enthusiastic youngster

    Cool post, well done, thank you for taking the time to mentor the young fella.

    Liked On: 22-07-2022, 08:45 PM

13. 
    BSA270 liked post by Husky1600 On thread : Pig traps

    12 or 14ft gates work great, 2 for the sides, one for the roof, gotta have a roof! And tie the bloody thing down with well driven Waratahs. Make a gate for one end, or both ends, as Micky described....

    Liked On: 18-07-2022, 11:08 PM

14. 
    Moa Hunter liked post by Husky1600 On thread : Best .22 value for money?

    If you want a go to, work rifle, for busting bunnies etc, then I would go for either a 10/22, or a Marlin bolt.......if one of your budget was a major consideration. If you wanted a good bolt 22,...

    Liked On: 18-07-2022, 09:49 AM

15. 
    Micky Duck liked post by Husky1600 On thread : Best .22 value for money?

    If you want a go to, work rifle, for busting bunnies etc, then I would go for either a 10/22, or a Marlin bolt.......if one of your budget was a major consideration. If you wanted a good bolt 22,...

    Liked On: 17-07-2022, 12:42 PM

Page 21 of 101 First ... 789101112131415161718192021222324252627282930313233343571 ... Last

• Jump to page: