There's a retired toolmaker around the corner from me that pickles everything known to man: eggs, mushrooms, walnuts, chillis of all sorts, you name it. Eg: this dude got shitty that worchestire...
Liked On: 05-06-2017, 02:47 PM
One of the key outcomes of the clean streams accord was an agreement to fence off all dairy farm waterways in order to reduce faecal contamination (through stopping dairy cows having direct access to...
Liked On: 16-05-2017, 09:34 PM
The weather the last few days had been crap but Saturday looked like it was on the improve. Beeman and I had up to our regular haunt for a hunt on a cold clear dawn. Within half an hour of daylight...
Liked On: 14-05-2017, 01:05 AM
1. Stop over thinking it. It's a bullet. If it doesn't work for you, try another one. 2. Go hunting. Talking hunting and doing hunting are different things.
Liked On: 30-04-2017, 07:43 PM
For some reason I really love hunting in the rain, especially if you stay dry. I also find it can be a very productive time to hunt. A mate and I had organised a Goat hunt for yesterday. The...
Liked On: 29-04-2017, 11:57 PM
Just how far did you shoot your tahr was it near or was it far was it right up close or way way over thar. Did it fall down dead from a shot to the head or stagger a bit from to hard of...
Liked On: 29-04-2017, 04:20 PM
let me know if this is the wrong place or unwanted, but thought I'd share a google drive link with a few reloading manuals/books i found not to sure which will be helpful as some are pretty old...
Liked On: 26-04-2017, 02:18 PM
OK Dan. For me the velocity testing is complete. I'm going to PM you the results. In this way it now becomes your information, and probably the end of this thread. Cheers
Liked On: 26-04-2017, 09:48 AM
Another point to consider when using ADI powders is that they are less likely to be affected by temperature changes as other powders like WInchester and IMR. Plus you are more likely to be able to...
Liked On: 25-04-2017, 09:45 AM
Hi Dan In reference to your comment above - I once owned a 7-08 Browning BBR. Tried all sorts of things to get it shooting better - eventually sold it [wish I hadn't] - but anyway, sometime latter I...
Liked On: 23-04-2017, 04:43 PM
Thanks to everyone who's putting their opinion out there on the topic of annealing projectiles - however, as it's heading off in a tangent to Dan's initial thread, I suggest someone starts a new...
Liked On: 21-04-2017, 09:31 PM
Just start with the ADI start load and work up in .5 grain steps load 3 of each you will find the best accuracy for that combination before you reach maximum pressure in your rifle seat bullets to...
Liked On: 15-04-2017, 07:52 PM
well I don't know how that works because my 270 win load is a 150 LRAB in front of 54gr 2209, 2850fps, 20" barrel
Liked On: 14-04-2017, 10:04 PM
Hi Dan, I can see your still grappling with the problem of shooting 150gn SST in the 270win. It's something I've been meaning to do for a while so I will also do some load development work for...
Liked On: 14-04-2017, 06:27 PM
Personally I wouldnt bother with the 2217, fine for magnums but if you are starting with compressed loads you dont have anywhere to go. I also think compressed loads are not for a begginner or...
Liked On: 14-04-2017, 06:27 PM