inglishill
Member

215 Likes

Page 1 of 15 123456789101112131415 Last

• Jump to page:

1. 
   DBD liked post by inglishill On thread : 7mm rem mga is is too slow

   There is also a current conversation on it here https://www.nzhuntingandshooting.co.nz/f10/7mm-rem-mag-loads-113691/ I ended up settling on 162gr A-Max with 72gr 2217 for just over 3000FPS out of...

   Liked On: Yesterday, 08:28 PM

2. 
   7mmsaum liked post by inglishill On thread : 7mm rem mga is is too slow

   There is also a current conversation on it here https://www.nzhuntingandshooting.co.nz/f10/7mm-rem-mag-loads-113691/ I ended up settling on 162gr A-Max with 72gr 2217 for just over 3000FPS out of...

   Liked On: Yesterday, 08:41 AM

3. 
   Tommy liked post by inglishill On thread : Insanity rules in the vetting process

   I will come back to you with a more measured answer, but at this stage as per the rules 'There aren't many rules here but not negotiable is no Politics, no religion, no bullying/abuse, keep it fit...

   Liked On: 04-05-2025, 10:55 AM

4. 
   Tommy liked post by inglishill On thread : Insanity rules in the vetting process

   It was an honest question. Maybe an appropriate answer is, 'Apart of course during times of war when murder with a firearm is legal, all other murders by firearms may be considered crossing the...

   Liked On: 04-05-2025, 10:53 AM

5. 
   Tommy liked post by inglishill On thread : Insanity rules in the vetting process

   The biggest issue here is that if we are not able to have open honest conversation about it then how are we to determine if we are seeing it again? The question of where the line is is a fair one,...

   Liked On: 04-05-2025, 10:53 AM

6. 
   Kelton liked post by inglishill On thread : Tikka barrel weight

   7mm Rem Mag standard profile no fluting 615mm - 1123g 300 Win Mag standard profile no fluting 565mm - 1014g Both are threaded M15 and weighed with the factory thread protectors on them.

   Liked On: 03-05-2025, 04:26 PM

7. 
   Matty72 liked post by inglishill On thread : GettingThere... slowly

   I have been thinking about your equation; So N+1 seems fine, for a single man. I think there may need to be some fine polishing for some other members who have families and so on and so forth. ...

   Liked On: 30-04-2025, 11:58 AM

8. 
   dylski10 liked post by inglishill On thread : Hi all…

   Hey there, welcome to the forum :)

   Liked On: 30-04-2025, 11:03 AM

9. 
   Shearer liked post by inglishill On thread : 243 on deer

   95grain TMK dropped one last weekend no issue. Loaded with 42grains of 2209, through a mossberg patriot @ 180 yards.

   Liked On: 29-04-2025, 09:58 PM

10. 
    Trout liked post by inglishill On thread : 243 on deer

    95grain TMK dropped one last weekend no issue. Loaded with 42grains of 2209, through a mossberg patriot @ 180 yards.

    Liked On: 29-04-2025, 09:20 PM

11. 
    Tahr liked post by inglishill On thread : 243 on deer

    95grain TMK dropped one last weekend no issue. Loaded with 42grains of 2209, through a mossberg patriot @ 180 yards.

    Liked On: 29-04-2025, 09:13 PM

12. 
    GettingThere liked post by inglishill On thread : GettingThere... slowly

    I have been thinking about your equation; So N+1 seems fine, for a single man. I think there may need to be some fine polishing for some other members who have families and so on and so forth. ...

    Liked On: 29-04-2025, 06:26 PM

13. 
    GettingThere liked post by inglishill On thread : GettingThere... slowly

    Welcome to the forum :)

    Liked On: 29-04-2025, 02:19 PM

14. 
    Bol Tackshin liked post by inglishill On thread : Insanity rules in the vetting process

    \ Yeah man, you serve your time and you have paid your dues, that is the way our court system (if not society) works.

    Liked On: 29-04-2025, 01:10 PM

15. 
    outlander liked post by inglishill On thread : Insanity rules in the vetting process

    You must be under the misguided impression that the justice (sorry 'court') system is a) fair and b) actually cares about justice :)

    Liked On: 29-04-2025, 12:18 AM

Page 1 of 15 123456789101112131415 Last

• Jump to page: