JoshBadger
Member

11 Likes

1. 
   JoshBadger liked post by gimp On thread : Testing a conventional approach to load development

   Thank you, but I have always been aware of this from a simple hunting perspective. I'm trying to increase the knowledge of the community and help others find better ways of doing things, particularly...

   Liked On: 13-08-2025, 02:15 PM

2. 
   JoshBadger liked post by Bagheera On thread : Best brass for relaoding

   Are you looking for brass life as “best quality” ? I got at least half a dozen loads from 303 Norma brass and it was still going strong. In the 7mm08 it did a good dozen before any failures at all....

   Liked On: 04-08-2025, 10:57 AM

3. 
   JoshBadger liked post by gimp On thread : Best brass for relaoding

   The most compelling evidence available suggests that annealing is good for your brass life and makes no difference detectable on target for precision or velocity consistency. The guy selling a $3000...

   Liked On: 01-08-2025, 04:10 PM

4. 
   JoshBadger liked post by gimp On thread : Best brass for relaoding

   Depending on what rifle, bullet, and range you're shooting, and how you measure precision or consistency - you may not see any real improvement in actual results on target with premium brass. You...

   Liked On: 01-08-2025, 11:06 AM

5. 
   JoshBadger liked post by Seventenths On thread : Best brass for relaoding

   If you’ve got a good recipe already, don’t change the incredients! Lapua is definitely the king ��

   Liked On: 31-07-2025, 01:44 PM

6. 
   JoshBadger liked post by LJP On thread : Best brass for relaoding

   Lapua is always the first mentioned for good reason..... however the ADG stuff is as good if not better. Super consistent weight & neck uniformity. Lapua, ADG, Peterson always the first choices...

   Liked On: 31-07-2025, 01:44 PM

7. 
   JoshBadger liked post by rupert On thread : Best brass for relaoding

   I have found RWS and DKW to be very good brands, at least as good as Norma, if not better.

   Liked On: 31-07-2025, 01:44 PM

8. 
   JoshBadger liked post by Rated M for Magnum On thread : Best brass for relaoding

   Sticking to one brand eliminates a variable. There can be large differences in alloys used giving different neck tensions, spring back, sizing force. If later on your want to anneal, then you don't...

   Liked On: 31-07-2025, 01:43 PM

9. 
   JoshBadger liked post by lau lau On thread : Best brass for relaoding

   I reload for a few different rifles. My comp rifles use lapua, Petersen and Norma without any issues and plenty of reloads. My hunting rifles run mostly starline, which isn't too costly when you...

   Liked On: 31-07-2025, 01:27 PM

10. 
    JoshBadger liked post by Pommy On thread : Best brass for relaoding

    Lapua, Alpha, Peterson, ADG > Norma, Nosler > Federal, PMC, PPU, Starline > Hornady, Remington > Fiocchi (GFL), Winchester.

    Liked On: 30-07-2025, 11:17 AM

11. 
    JoshBadger liked post by Zedrex On thread : .243 load development part deux

    That's what "we" thought, room for some fine tuning perhaps but pretty much good enough for the current shooter, might want to redial my zero just to give me a touch more margin

    Liked On: 28-07-2025, 01:42 PM