JT_NZ
Member

76 Likes

Page 5 of 6 First 123456 Last

• Jump to page:

1. 
   JT_NZ liked post by Zkmas On thread : Tikka 6.5 cm with 140g eld-m

   Hey guys, I'm working on a load with 140g eldm for my t3x 6.5 creedmoor. Its a standard 22" barrel. What have people been finding for sweet spot velocity? I thought I had a load at about 2630fps but...

   Liked On: 10-01-2021, 12:51 PM

2. 
   JT_NZ liked post by GWH On thread : VIDEO: Long Range Red Deer Meat Hunt

   Yes in hindsight we messed up, we watched it for a little while and didnt think it had a fawn.

   Liked On: 22-12-2020, 08:25 PM

3. 
   JT_NZ liked post by Sarvo On thread : DAY SCOPE VERSES NIGHT SCOPE.

   Sounds like he needs someone to show how to sight in his Thermal What model is it ? Maybe its loose on the rail ? They are easy as to sight in (not 1/2 inch grouping but very easy 2" or less) all...

   Liked On: 21-12-2020, 05:32 PM

4. 
   JT_NZ liked post by MSL On thread : Hut options upper rangitata?

   https://uploads.tapatalk-cdn.com/20201217/583d8e2172838a7dbca9e161320a7849.jpg Long way to walk, as 2wd won’t get you very close Sent from my iPhone using Tapatalk

   Liked On: 18-12-2020, 10:44 AM

5. 
   JT_NZ liked post by stagstalker On thread : Large MV variation from trueing

   JT_NZ and Cigar What Cigar has just said rung some bells. Although I have not physically measured drop at distance or done a full on tracking test with this scope (Swarovski Z5), the previous...

   Liked On: 14-12-2020, 01:37 PM

6. 
   JT_NZ liked post by Cigar On thread : Large MV variation from trueing

   Are you measuring drop at distance without changing your dials from your zero? If not, it could be your clicks are not exactly quarter MOA. I have fired shots over two chronys (Magnetospeed and...

   Liked On: 14-12-2020, 12:17 PM

7. 
   JT_NZ liked post by stagstalker On thread : Large MV variation from trueing

   JT_NZ 1. The one thing I definitely didn't do by the book was the range. I shot it at 657 yards rather then the 10% back from transonic which is about 1020 yards for this rifle. The reason I did...

   Liked On: 14-12-2020, 11:36 AM

8. 
   JT_NZ liked post by stagstalker On thread : Large MV variation from trueing

   Keen to pick the brains of some who may really know the weeds better. I have recently finished a load for my new 260 shooting the 142 Nosler Accubond Long Range projectile. For all my loads and...

   Liked On: 14-12-2020, 06:59 AM

9. 
   JT_NZ liked post by Cowboy06 On thread : The Ultimate Hunter Simulated field shoot

   No restrictions but spirit of the course is hunting scenarios. We are not running it as a match. This is an experience for people to get out and enjoy shooting and for new guys to come along without...

   Liked On: 03-12-2020, 11:41 AM

10. 
    JT_NZ liked post by Cowboy06 On thread : The Ultimate Hunter Simulated field shoot

    The Ultimate hunter field shoot course is scheduled for the 31st of January, the King of the range ELR is on the 30th January. RSVP your entry to come and shoot now, it is up on www.sparrowhawk.co.nz...

    Liked On: 03-12-2020, 11:40 AM

11. 
    JT_NZ liked post by Tentman On thread : Truing a Ballistic Calculator

    Hey thanks guys, appreciated. I'm in a learning phase hence all the questions. Not worried and raring to try new stuff. We all gotta break-out of our comfort zones from time to time and the forum...

    Liked On: 03-12-2020, 08:43 AM

12. 
    JT_NZ liked post by Dermastor On thread : Economical Gong Gun cartridge?

    Mate stop being such a snow flake. Shooting is not a cheap sport. Giving up performance to justify a budget makes no sense. How much will you really save going from a 308 to a 6cm to a 6x47L. Sure...

    Liked On: 03-12-2020, 07:27 AM

13. 
    JT_NZ liked post by blair993 On thread : Truing a Ballistic Calculator

    Tentman. Use what you have it. It will work fine. As long as you are within 0.2mil 300m>700m for this weekend you will fine. We can adjust your data if needed as we go. Most of what has been posted...

    Liked On: 03-12-2020, 06:49 AM

14. 
    JT_NZ liked post by Tentman On thread : Truing a Ballistic Calculator

    Hey thanks for that JT_NZ , I watched the video and it made sense.

    Liked On: 03-12-2020, 06:48 AM

15. 
    JT_NZ liked post by stagstalker On thread : Truing a Ballistic Calculator

    What this man said ^ JT_NZ I read that article and just thought wow, that was one way of making what is a simple process a whole lot longer and more complicated and not even necessarily correct...

    Liked On: 03-12-2020, 06:48 AM

Page 5 of 6 First 123456 Last

• Jump to page: