I got it to the stage where it shoots 40gr great at 3150fps but curiosity got the best of me this morning. The .22 TCM reamer I ordered just had the std length free bore for the pistol cambering so...
Liked On: 16-11-2018, 01:19 PM
Tested the TCM on a soft target this morning.. 185 yards with a 40gr V-Max.. seems to do the job... https://preview.ibb.co/ixU8AA/20181113-101020.jpg (https://ibb.co/jb4x3V)
Liked On: 13-11-2018, 11:53 AM
So I decided to leave the Brno 465 Hornet alone after checking out the magazine for TCM. The 465s shorter action and forward mounted ejector compared to the Brno .222 and CZ 527 is an advantage for...
Liked On: 10-11-2018, 01:17 AM
https://preview.ibb.co/bWzuqA/20181108-190438.jpg (https://ibb.co/dSiLVA) I had a quick session with the TCM today and the new Alliant 300MP powder... The powder looks just like H110/Win 296 but...
Liked On: 10-11-2018, 01:15 AM
A little more midnight oil burnt and I got the Shilen barrel threaded for a suppressor and loaded some more test loads. This time I loaded on once fired brass and use CCI BR-4 primers to see if...
Liked On: 08-11-2018, 11:47 PM
My COAL is 39mm running 13gr of H110 with an average speed of 3180fps in the 22" 1-12" twist but the ES is all over the show. It might get better on the second loading once all the brass is fire...
Liked On: 04-11-2018, 11:07 PM
Ha ha.. calm down you lot :XD: Its nice to see some interest in my thread but unfortunately this one is happening in real time.. Im running a 7 day a week business as well as a household with 2...
Liked On: 04-11-2018, 12:19 PM
.22TCM Varmint Rifle build The .22 TCM is a cartridge designed to run out of a 1911 pistol magazine and reaches a scorching 2000fps with a 40gr bullet for the 5” barrel. ...
Liked On: 02-11-2018, 10:28 PM
I loaded some more Hodgdon Lilgun loads today, the start load of 10g.. no blown primers today. 10.0gr = 3034fps 10.5gr = 3069fps 11.0gr = 3144fps Flat primer with cratering Im going to call...
Liked On: 02-11-2018, 10:27 PM
So after some promising results with H110 I shot into town to pick up some Lilgun as Ive read its the go to powder in hornet at the moment and found some mentions on forums of guys using it to load...
Liked On: 02-11-2018, 10:26 PM
Before grouping I wanted to address the brass necks a little more. The Armcor Precision co brass was fairly roughly cut on the case mouth and lengths varied quit a bit which wasnt helping when trying...
Liked On: 02-11-2018, 10:25 PM
9722097221 Here you go @Mary Henry have to agree with you when everyone is bang on about 270 this and 300 that they seem to forget that this is the round that there round is based on. It's a bsa...
Liked On: 24-10-2018, 11:10 PM
Fucken nice bit of wood there Kamel , and nicely done.
Liked On: 23-10-2018, 11:40 AM
This is the 1885 Low wall action with a wooden octagonal barrel fitted so that the main spring could be installed to be able to test the full function of the action. And especially the single set...
Liked On: 16-10-2018, 08:26 PM
john m that is a very tidy Stevens Favorite !!! Original or refinished ? I have been laying into the hare's with my muzzleloader as practice for chasing a deer soon. Got this one 2 evenings ago...
Liked On: 16-10-2018, 08:07 PM