It’s taken quite a while and a lot of searching for a suitably sized compact hardcase for the Mini. There’s a gap in internal sizing around the 600mm length. Usually cases top out at 245mm then jump...
Liked On: 08-10-2023, 04:09 PM
So I finally got it to the range to give it a jam. I also gave it a basic JB weld bedding job too! There was a bit of a cross breeze, and I was shooting off a pack. The angle was too steep to get...
Liked On: 14-08-2023, 06:15 PM
Howa have recommended that the torque settings on the mini actions action screws are reduced to 35 inch pounds to reduce cracking of the plastic mag housing. ...
Liked On: 08-08-2023, 02:17 PM
Its a good video and well worth watching He is talking about the average not shooting 10 groups and picking the best single group, was a few days ago but im preddy sure he is using 5 shot groups,...
Liked On: 29-07-2023, 10:21 PM
Was it worth the wait? Absolutely!!! 229508 The Magpull MOE+ grip is perfect though would have preferred the OD Green. Soft fitted scope and suppressor and adjusted the cheek piece back a bit...
Liked On: 24-07-2023, 08:56 PM
My 14.5" trueflight barrel got 2550fps with 123gr Lapua scenars with 27.8gr of 8208. You might find youd get more speed with a slower powder like Aliant power pro varmint in that longer barrel....
Liked On: 10-07-2023, 11:30 AM
Or... chop it. There are only benefits from running a short compact Grendel, once you go short you'll never bother with a long barrel again. The animals won't know the difference at the ranges...
Liked On: 09-07-2023, 10:57 AM
perfect...LEAVE IT ALONE for 12 months and then decide if want to shorten..... you may decide its good enough as it is,I know I like my wee shorty rifle at times but most of the time happy to carry a...
Liked On: 09-07-2023, 10:53 AM
Meet "Boss Hog" 13" .450 Bushmaster with 0 moa Talley rail, lightweight Vortex pro rings, Leupold 1-4x pig plex, carbon fiber Accutech wide stance bypod and a 1913 picatinny to AR15 buffer adaptor...
Liked On: 08-07-2023, 04:11 PM
I'm enjoying seeing all the personal customers builds come through, some cool ideas out there. I'm awaiting barreled actions for a few more which will hopefully be ready next week. I'm quite a fan...
Liked On: 08-07-2023, 04:11 PM
228311228312 My Elude chassis with a 16" 7.62x39, dpt can.. 2.818kg empty. Why is it a little different to the others, well I'm the guy who does the machining and I got the anodiser to play with...
Liked On: 08-07-2023, 04:10 PM
18" including the suppressor still leaves 14" of barrel.. bit on the long side there mate :D
Liked On: 08-07-2023, 04:09 PM
I agree withMD you were onto animals in less than favourable conditions so a nice day could produce the goods. Also the more trips the better you will know the country which will further increase...
Liked On: 06-07-2023, 08:40 AM
you know something???? I WOULD be going back.....you had really shit weather and still got close 3 times and eye balled one... your dog was doing it right..... love the rifle..... you stop and...
Liked On: 06-07-2023, 08:39 AM
do I hear a car starting up as Adam is running out door to rush and collect it???
Liked On: 03-07-2023, 10:53 PM