To answer your question You can do your load development with the break fitted so you can fire decent strings of shots without the mirage bothering you. When you're happy, clean your rifle,...
Liked On: 07-06-2020, 08:59 AM
I have done most of my load dev on rifles, including magnums, with out suppressor or brake found the sweet spot for accuracy and speed, then confirmed that load with suppressor or brake I intend to...
Liked On: 02-06-2020, 08:46 PM
Take a small fan with you. It will blow the mirage away before it rises into the fov of the scope. Helps the suppressor cool down a bit faster too.
Liked On: 02-06-2020, 06:40 PM
https://youtu.be/KoiJGR5n6Dc
Liked On: 01-06-2020, 09:12 AM
Took my girlfriend out for her first hunt in pureora yesterday, bit of rain here and there but overall not bad weather. Followed an old overgrown track for a couple ks which i had shot a pig on...
Liked On: 31-05-2020, 09:22 PM
I found definite POI shift between brake/suppressor, grouping marginally smaller with the suppressor and velocity up 20-30fps as well. I used the brake for initial forming/working up in my 7...
Liked On: 30-05-2020, 07:37 PM
Muzzle devices I've tried like a Magnetospeed crony, brake and suppressor have all had some change in POI, but as far as I can tell only the brake had any effect on groups, and that so minor that I...
Liked On: 30-05-2020, 07:37 PM
My 7mmsaum does what you are wanting. Except I did it the other other way around - developed my load with a suppressor then changed to the brake. But the load works the same with either.
Liked On: 30-05-2020, 07:37 PM
Hey everybody , went up to workshop innovations today. Big thumbs up to Robert there , was really helpful , knowledge-able guy , that had a shitload of gear in there. And had very very...
Liked On: 29-05-2020, 09:06 PM
send it to me i can sort that for you cheers john
Liked On: 25-05-2020, 07:53 PM
https://bulletin.accurateshooter.com/2014/08/tech-tip-mirage-shields-they-arent-all-the-same/ Have no experience with this. A strip of aluminium Venetian blind has about the right profile...
Liked On: 22-05-2020, 09:19 PM
Hi hopefully this works, it is the work RICHARD FRAILEY did on 284 load development. Very interesting and detailed, good info on primers and powder position, temperature impact etc. Cheers 7mm...
Liked On: 22-05-2020, 09:10 PM
A decent suppressor cover will mitigate the mirage.
Liked On: 20-05-2020, 10:52 PM
So one of the things I loved about the lock down was I had time to actually sit down and get a few ideas that had being floating around in my head for awhile started. As some of you may recall I...
Liked On: 20-05-2020, 07:08 PM
Tangent Theta, makes everything else I own seem like junk
Liked On: 19-05-2020, 10:41 AM