lau lau
Member

161 Likes

Page 8 of 11 First 1234567891011 Last

• Jump to page:

1. 
   BruceY liked post by lau lau On thread : Dooley's Hut ....

   Was in that area about 3 years ago. Not in the best state, need alot of work but seemed dry enough inside

   Liked On: 10-12-2021, 07:24 AM

2. 
   chainsaw liked post by lau lau On thread : Brass life...

   Its telling you its time to rebarrel a 7mm creedmoor .

   Liked On: 18-11-2021, 10:25 AM

3. 
   Ben_welder liked post by lau lau On thread : Brass life...

   Its telling you its time to rebarrel a 7mm creedmoor .

   Liked On: 18-11-2021, 09:27 AM

4. 
   superdiver liked post by lau lau On thread : Shortened 7mm08 advice

   Ive used the 162 Amax at distances from 10meters out to 602meters in my 18inch 7mm08 without any issues. As muzzle velocity was only 2530fps, it still works fine. Was using the 162eld-m as well....

   Liked On: 26-09-2021, 05:57 PM

5. 
   keengunNic liked post by lau lau On thread : Shortened 7mm08 advice

   Ive used the 162 Amax at distances from 10meters out to 602meters in my 18inch 7mm08 without any issues. As muzzle velocity was only 2530fps, it still works fine. Was using the 162eld-m as well....

   Liked On: 26-09-2021, 04:46 PM

6. 
   keengunNic liked post by lau lau On thread : Shortened 7mm08 advice

   I ran an 18inch tikka7mm08 for years, ran as a long actiom and threw the 162Amax @ 2530fps. Fallow and goats werent an issue out to 500meters. With longest shot being a 602meter goat. Helped...

   Liked On: 26-09-2021, 02:12 PM

7. 
   superdiver liked post by lau lau On thread : Shortened 7mm08 advice

   I ran an 18inch tikka7mm08 for years, ran as a long actiom and threw the 162Amax @ 2530fps. Fallow and goats werent an issue out to 500meters. With longest shot being a 602meter goat. Helped...

   Liked On: 26-09-2021, 12:30 PM

8. 
   superdiver liked post by lau lau On thread : 7mm08 ideas

   Ive been running the 162gr eld in my 18inch 7mm08 with 41gr 2208 @2530fps for years. Taken fallow and goats from 10meters out to 602meters. The 120gr BT are also a good choice. Have since...

   Liked On: 26-08-2021, 02:03 PM

9. 
   3hundred win mag liked post by lau lau On thread : Mdt Xrs chassis

   Ive just ordered one for a tikka creedmoor build Hopefully here by the end of thr week.

   Liked On: 06-07-2021, 09:54 AM

10. 
    Larskramer liked post by lau lau On thread : the next build.... somthing... longer legged ?

    7mm-300 norma

    Liked On: 01-07-2021, 06:29 PM

11. 
    mikee liked post by lau lau On thread : the next build.... somthing... longer legged ?

    7mm-300 norma

    Liked On: 01-07-2021, 01:44 PM

12. 
    superdiver liked post by lau lau On thread : Bushpig 7mm - 7mm08 vs 284

    I've got both 7mm08 and 284 18inch bushpigs. Both tikkas and run 162gr pills. The 7mm08 has been my goto hunting rifle for several years, the 284 until very recently has been left in the safe. ...

    Liked On: 24-03-2021, 11:20 AM

13. 
    rewa liked post by lau lau On thread : Neck turning...is it worth doing ?

    Unless your using bushing dies or a tight neck chamber, i wouldn't bother. I'm having to neck turn my hornady brass in the 300prc, bushing die with inconsistent neck thickness.

    Liked On: 27-12-2020, 12:35 PM

14. 
    Ftx325 liked post by lau lau On thread : Neck turning...is it worth doing ?

    Unless your using bushing dies or a tight neck chamber, i wouldn't bother. I'm having to neck turn my hornady brass in the 300prc, bushing die with inconsistent neck thickness.

    Liked On: 21-12-2020, 11:54 PM

15. 
    hamsav liked post by lau lau On thread : Neck turning...is it worth doing ?

    Unless your using bushing dies or a tight neck chamber, i wouldn't bother. I'm having to neck turn my hornady brass in the 300prc, bushing die with inconsistent neck thickness.

    Liked On: 21-12-2020, 08:14 PM

Page 8 of 11 First 1234567891011 Last

• Jump to page: