Longrun
Member

411 Likes

Page 8 of 28 First 12345678910111213141516171819202122 ... Last

• Jump to page:

1. 
   Longrun liked post by No.3 On thread : Lower than expected velocities

   Nailed it there - for whatever reason that batch of components are not achieving the listed speeds. 'Max' is what the factory lists for the rifle using factory ammo , within a few percent should be...

   Liked On: 05-09-2024, 04:49 PM

2. 
   Longrun liked post by Micky Duck On thread : Lower than expected velocities

   Fark me....if you can't do that with 25/06 you might as well just use a 270 and do it.... Just chuck the chronograph away and be happy lol

   Liked On: 05-09-2024, 04:49 PM

3. 
   Longrun liked post by No.3 On thread : Lower than expected velocities

   Not so much the wrong chambering as the same factors would likely influence whatever else is chosen. It comes back to the trajectory, every extra inch of drop at 100 shortens your usable effective...

   Liked On: 04-09-2024, 10:30 PM

4. 
   Longrun liked post by Tech On thread : Lower than expected velocities

   Thanks, there is also a 257 Roberts and a 250 Savage AI hiding in the safe.

   Liked On: 04-09-2024, 09:05 PM

5. 
   Longrun liked post by Tech On thread : Lower than expected velocities

   My experience with the 25-06 has shown that the best accuracy tends to be close to max loads, currently I load for five different 25-06 rifles. In three of these rifles I found that the 100 grain...

   Liked On: 04-09-2024, 08:23 PM

6. 
   Longrun liked post by grandpamac On thread : Lower than expected velocities

   Greetings, I have had disappointing results with AR2208 in the .308 as well and have mostly used AR2206H for some years. I chronographed some comparison loads recently in a 24" barrel. AR2206H gave...

   Liked On: 04-09-2024, 12:44 PM

7. 
   Longrun liked post by No.3 On thread : Lower than expected velocities

   I hear you on this one, my .308win is doing this too. For some reason it's way down on velocity and I've basically checked everything mechanical with it to ensure I'm not getting sucked into porkies...

   Liked On: 04-09-2024, 12:40 PM

8. 
   Longrun liked post by Roarless20 On thread : 243 on deer

   The first rifle i bought was a Ruger m77mk2 .243 1:10twist. I shot a couple of hundred deer with it over about 14 years using the Hornady 87gr sp. Most were head or top of neck shot to 250m. 3-9...

   Liked On: 01-09-2024, 09:48 PM

9. 
   Longrun liked post by caberslash On thread : A question for the doubters

   Drillings and whatever the Eurosexuals call their triple-barreled hunting rifles are an excellent way to make a very expensive rifle that is crap at everything.

   Liked On: 01-09-2024, 07:25 PM

10. 
    Longrun liked post by woods223 On thread : Quiet effective sub caliber for hunting, is there such a thing?

    30 cal. 190 gr sub-X recovered from pig, about 45-50 kg on Friday. 10 gr Trail Boss, 16.5” Bergara takedown rifle, DPT suppressor. Shot was about 62m slightly quartering away behind front leg,...

    Liked On: 25-08-2024, 10:56 PM

11. 
    Longrun liked post by Micky Duck On thread : 7mm08 Projectiles - who's using what?

    Typewriter.,.. shikes I'm still pen n paper type of guy. But I do see your point. Funny that fellas get flash Harry super slippery plastic tipped. Weighed to last tenth of grain seated to hairs width...

    Liked On: 16-08-2024, 06:55 PM

12. 
    Longrun liked post by Dicko On thread : 7mm08 Projectiles - who's using what?

    Yes these and the 140 gn Sierra Prohunter flat bases. Time might move on but these are timeless… priced ok (Sierras are dearer). Sent from my iPhone using Tapatalk

    Liked On: 16-08-2024, 05:39 PM

13. 
    Longrun liked post by Crusty On thread : .22high power Savage

    Oldbloke, it depends if you are buying the gun or buying the cartridge. I happen to have got a bit hooked in Savage 99s, and now have about 11 of them. 22 Highpower 250-3000 300 Savage 303...

    Liked On: 10-08-2024, 07:23 PM

14. 
    Longrun liked post by Coop On thread : Dealer to dealer in person with no 43A ?

    It's sort of up to the dealers. I know we don't really like when it happens from another outfit to GC and vice versa. H&F is the same. If we're sending them a rifle then they require MoF done....

    Liked On: 06-08-2024, 06:57 AM

15. 
    Longrun liked post by Mangusta On thread : Oberndorf Mauser

    Just had a few out to clean....a 66 (made in 66) factory engraved rifle in 3006,a type b in 3006,a typeb model k in 250 savage, a type a magnum mauser, non sqaure bridge action,28 inch barrel in 280...

    Liked On: 04-08-2024, 09:02 PM

Page 8 of 28 First 12345678910111213141516171819202122 ... Last

• Jump to page: