About longshot

Basic Information


Date of Birth
March 13, 1980 (44)
About longshot
Location:
Wairarapa

Statistics


Total Posts
Total Posts
874
Posts Per Day
0.22
General Information
Last Activity
Yesterday 11:44 PM
Join Date
15-09-2013
Referrals
1

492 Likes

  1. Bill999
    Bill999 liked post by longshot On thread : Timney Trigger Causing Light Primer Strikes
    Should be someone local who can flick you some of their old primers. Even if you don’t reload you can still deprime and reprime with a hammer a nail and a piece of wood with the right shaped hole...
    Liked On: 26-04-2022, 09:34 AM
  2. Synthetic
    Synthetic liked post by longshot On thread : Arthur Cleland
    Good gunsmith. First time I met the guy was back in 1998. I had broken the bead off the front sight of a model 94. I rang up and asked if he could fix it and how much would it cost. He said...
    Liked On: 26-04-2022, 09:01 AM
  3. lau lau
    lau lau liked post by longshot On thread : Arthur Cleland
    Good gunsmith. First time I met the guy was back in 1998. I had broken the bead off the front sight of a model 94. I rang up and asked if he could fix it and how much would it cost. He said...
    Liked On: 26-04-2022, 08:45 AM
  4. Moa Hunter
    Moa Hunter liked post by longshot On thread : Frustrating arvo at the range. Powder charges.
    Adjustment of the screw to align the 10 will misalign the zero. If you could adjust it you would be looking for a happy medium where it’s out a bit at both ends and not noticeable (it would be out...
    Liked On: 26-04-2022, 08:44 AM
  5. Moa Hunter
    Moa Hunter liked post by longshot On thread : Frustrating arvo at the range. Powder charges.
    Snowgrass Ex instrumentation calibrator here and user of both balance beam and electronic scales. The only reason I use electronic scales is because mine are attached to a powder dispenser. ...
    Liked On: 26-04-2022, 08:37 AM
  6. Snowgrass
    Snowgrass liked post by longshot On thread : Frustrating arvo at the range. Powder charges.
    Adjustment of the screw to align the 10 will misalign the zero. If you could adjust it you would be looking for a happy medium where it’s out a bit at both ends and not noticeable (it would be out...
    Liked On: 25-04-2022, 11:26 PM
  7. Basenjiboy
    Basenjiboy liked post by longshot On thread : Budget Hunting Binoculars
    Had a look through my mates vortex binos the other day, dont know what model they were but very nice to look through, and probably not too highly priced either. If you are going cheaper, you...
    Liked On: 25-04-2022, 10:57 PM
  8. Micky Duck
    Micky Duck liked post by longshot On thread : Budget Hunting Binoculars
    Had a look through my mates vortex binos the other day, dont know what model they were but very nice to look through, and probably not too highly priced either. If you are going cheaper, you...
    Liked On: 25-04-2022, 10:45 PM
  9. Snowgrass
    Snowgrass liked post by longshot On thread : Frustrating arvo at the range. Powder charges.
    That is an example of inaccurate span that I mentioned earlier. In theory and most likely in practice it won't affect outputs but double weighing will confirm this. Most instrumentation has this...
    Liked On: 25-04-2022, 10:43 PM
  10. Micky Duck
    Micky Duck liked post by longshot On thread : Frustrating arvo at the range. Powder charges.
    That is an example of inaccurate span that I mentioned earlier. In theory and most likely in practice it won't affect outputs but double weighing will confirm this. Most instrumentation has this...
    Liked On: 25-04-2022, 10:30 PM
  11. Finnwolf
    Finnwolf liked post by longshot On thread : Arthur Cleland
    Good gunsmith. First time I met the guy was back in 1998. I had broken the bead off the front sight of a model 94. I rang up and asked if he could fix it and how much would it cost. He said...
    Liked On: 25-04-2022, 09:08 PM
  12. Snowgrass
    Snowgrass liked post by longshot On thread : Frustrating arvo at the range. Powder charges.
    Good move. Do you want to post a photo showing how the fixed zero doesn't line up with the zero on the screw weight?. Not sure that I can offer any advice there but I would like to understand it...
    Liked On: 25-04-2022, 09:04 PM
  13. Micky Duck
    Micky Duck liked post by longshot On thread : Frustrating arvo at the range. Powder charges.
    Snowgrass Ex instrumentation calibrator here and user of both balance beam and electronic scales. The only reason I use electronic scales is because mine are attached to a powder dispenser. ...
    Liked On: 25-04-2022, 08:42 PM
  14. Snowgrass
    Snowgrass liked post by longshot On thread : Frustrating arvo at the range. Powder charges.
    Snowgrass Ex instrumentation calibrator here and user of both balance beam and electronic scales. The only reason I use electronic scales is because mine are attached to a powder dispenser. ...
    Liked On: 25-04-2022, 08:33 PM
  15. erniec
    erniec liked post by longshot On thread : Budget Hunting Binoculars
    Had a look through my mates vortex binos the other day, dont know what model they were but very nice to look through, and probably not too highly priced either. If you are going cheaper, you...
    Liked On: 25-04-2022, 07:57 PM
Page 5 of 5 FirstFirst 12345

12-04-2022


22-03-2022


11-02-2022


19-01-2022


01-01-2022


22-12-2021


06-12-2021


21-11-2021


17-11-2021


06-11-2021


01-11-2021


29-10-2021


27-10-2021


28-09-2021


12-09-2021



Page 5 of 5 FirstFirst 12345
No results to display...
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!