All valid points. But be careful to find out what your chosen single shot weighs. Some are more than repeaters.
Liked On: 14-04-2023, 09:26 PM
so went with the Robliner, good suggestion cambo just picked up the truck today after having the rust issues addressed and the "test" paint done, i think that was more so for the spray painters who...
Liked On: 14-04-2023, 06:21 PM
Not hard to do diffs, probably easier than engine oil changes?
Liked On: 09-04-2023, 10:29 PM
I run the 300blk in the night ops deer pic. Not a 6.5 but as a data point, 10.5" barrel (longer butt tube to keep total length all good), 110vmax with 20.5gn W296 in ADI case with CCI400 primer. avg...
Liked On: 09-04-2023, 09:08 PM
Love or hate GC. Tipple did throw down a large chunck kf change in legal fees standing up for us firearms owners. And as far as I'm aware. Didn't throw another competitor under the bus at the same...
Liked On: 07-04-2023, 11:33 PM
I got an 80% surgeon back in the 70's. You cant take them to the disputes tribunal, or the courts, unlike a gunsmith.
Liked On: 06-04-2023, 08:29 PM
You are not the only one getting such an email as my daughter rang me to tell me she had received one last night. In her instance it is not license renewal that has gotten in the way but her service...
Liked On: 31-03-2023, 10:05 AM
I understand what you are saying, but we live in a brave new world... The point I am making is : don't make it a bigger issue than it needs to be. Going forward, the major concern I have is the...
Liked On: 23-03-2023, 01:24 PM
lanolin is just a fat. Try washing in hot soapy water. Dish washing detergent should do the trick. I would shake it up in a plastic container.
Liked On: 17-03-2023, 10:04 AM
Great 30min vid expanding on the same. https://www.youtube.com/watch?v=XwUkbGHFAhs
Liked On: 15-03-2023, 09:58 PM
I've got a flat cast plate off an old BBQ which can be set up on some rocks with fire underneath. Plate is about 600 x 400.
Liked On: 15-03-2023, 09:00 PM
The rest is backwards.
Liked On: 09-03-2023, 08:56 PM
Foot pedals come into their own when welding aluminium. The high heat conductivity means that as the work heats up less heat input is needed. which means weld faster or lower the amps. It's a lot...
Liked On: 23-02-2023, 07:15 PM
I've done the pull & replace a few times in the past & all worked well. I also prime with large pistol primers in the 7.62x54R steel cases when rifle primers are scarce & they still work fine @ the...
Liked On: 23-02-2023, 10:34 AM
FFS. As posted before, I have done this hundreds of times with various military rounds. Simply remove fmj and replace with same or lights bullet weight then go hunting. Never bothered resizing neck,...
Liked On: 23-02-2023, 10:34 AM