Magnetite
Member

114 Likes

Page 7 of 8 First 12345678 Last

• Jump to page:

1. 
   Magnetite liked post by Jhon On thread : Reloading begginer info needed

   There are no shortcuts in reloading. There's a rather delightful long winded old fella on YouTube who can tell you all you need to know to get started and he knows what he is talking about..Google...

   Liked On: 23-08-2021, 06:37 PM

2. 
   Magnetite liked post by Micky Duck On thread : 6.5x55: 2213SC is too slow for 120gr, I say BAH!

   you do realise you have used up 30x 6.5mm projectiles to make that !!!!!!!! Im too cheap for that carry on....3 in wee group,adjust zero and fire another couple or three to confirm and call it...

   Liked On: 23-08-2021, 02:48 PM

3. 
   Magnetite liked post by Tahr On thread : 6.5x55: 2213SC is too slow for 120gr, I say BAH!

   Nice. But your velocity is shit.

   Liked On: 23-08-2021, 02:46 PM

4. 
   Magnetite liked post by 257weatherby On thread : 6.5x55: 2213SC is too slow for 120gr, I say BAH!

   Keep at it, you'll get there eventually.

   Liked On: 23-08-2021, 02:46 PM

5. 
   Magnetite liked post by Kiwi Sapper On thread : How accurate are your beam scales?

   Magnetite What a beast! I am shocked, stunned and a not a little bit amazed.............were a chair nearby, I would fall heavily into it and sit stunned for several minutes.

   Liked On: 16-08-2021, 06:44 PM

6. 
   Magnetite liked post by grandpamac On thread : I think I may have F@#%ed up...

   Or a deer with its jaw shot off that wanders of to starve to death.

   Liked On: 04-08-2021, 11:18 AM

7. 
   Magnetite liked post by veitnamcam On thread : Fawwwwk!!!

   Well its not out the gate for premium projectiles but these are just ordinary ol hornadys!

   Liked On: 02-08-2021, 10:36 PM

8. 
   Magnetite liked post by stagstalker On thread : Myth? - shorter barrel = use faster powder?

   My experience has been that the “use fast burning powders for a short barrel” isn’t really a thing. Certain powders in certain configurations just tend to give better velocities then others and is...

   Liked On: 29-07-2021, 09:28 PM

9. 
   Magnetite liked post by zimmer On thread : annealing

   I have to ask, why do you wish to anneal?

   Liked On: 19-07-2021, 11:10 PM

10. 
    Magnetite liked post by ZQLewis On thread : Matches with hunting bullets

    this guy started with the berger VLD hunting and then changed to the Berger Hybrid so he just uses 1 COA length across several rifles and does not compensate for throat wear. Jumping 30-85 thou". ...

    Liked On: 04-07-2021, 09:46 PM

11. 
    Magnetite liked post by Bagheera On thread : Matches with hunting bullets

    For me, there's a definite benefit to using just one bullet and getting to know it. I use a hunting bullet with excellent terminal ballistics and good accuracy(NBT) and shoot about half of them at...

    Liked On: 29-06-2021, 09:22 PM

12. 
    Magnetite liked post by Pommy On thread : Matches with hunting bullets

    I used to do that but have kind of stopped and tend to do a bit more research on the specific bullets I'm considering. Manufacturers know that BC sells, so there's been a bit of a push towards...

    Liked On: 29-06-2021, 07:55 PM

13. 
    Magnetite liked post by grandpamac On thread : Soot On Case Bodies

    Greetings Again, The powder all burns in the barrel in spite of what some believe so the problem with AR2213SC is you can't get enough in the case to develop the velocity. Hodgdon gives a load of...

    Liked On: 12-04-2021, 04:08 PM

14. 
    Magnetite liked post by gundoc On thread : Soot On Case Bodies

    It looks like you are using a suppressor in which case the sooting is a normal by-product caused by a higher residual bore pressure after the shot has left the barrel and is nothing to be concerned...

    Liked On: 12-04-2021, 11:08 AM

15. 
    Magnetite liked post by Pommy On thread : New to reloading - to what fraction of a grain do you test new loads? 0.5gr, 0.3gr...

    1% of case capacity, rounded to the nearest .1 is a decent guideline.

    Liked On: 20-01-2021, 05:36 AM

Page 7 of 8 First 12345678 Last

• Jump to page: