Magnetite
Member

104 Likes

Page 5 of 7 First 1234567 Last

• Jump to page:

1. 
   Magnetite liked post by Ross Nolan On thread : 3 vs 5 shot groups

   I find the best use of a 3 shot group is to identify loads during development that aren't any good. Tight 3 shot groups may ( probably will) expand when turned into statistically useful 10 shot...

   Liked On: 23-02-2022, 10:09 AM

2. 
   Magnetite liked post by grandpamac On thread : 1 load 2 rifles

   Greetings, I had two rifles of the same make and model at one time but their chambers were quite different. If your load is no higher than current book max then cutting back a couple of grains and...

   Liked On: 22-02-2022, 03:13 PM

3. 
   Magnetite liked post by LMcNab On thread : Simple removable reloading press setup.

   Just finished my setup today. Components are in the draws, press and powder thrower can be stored out of the way in about 5 seconds. https://youtube.com/shorts/EbVSmMPv-UU?feature=share

   Liked On: 20-02-2022, 06:40 PM

4. 
   Magnetite liked post by Chur Bay On thread : Why mixing headers and pointers?

   100 percent will have 50 percent of each parent. What changes is the particular combination of genes/alleles that each offspring has. This means while some pups may look a lot like Dad or Mum, they...

   Liked On: 29-01-2022, 05:53 PM

5. 
   Magnetite liked post by Allizdog On thread : Projectile performance

   I find it immoral to shoot a deer with only the amount of meat recovery in mind, rather than the quick and humane expiry of it first and foremost even if that means losing some meat from a shoulder...

   Liked On: 23-01-2022, 04:55 PM

6. 
   Magnetite liked post by Micky Duck On thread : Projectile performance

   and you cant make an omlet without breaking eggs...a bullets JOB is to destroy stuff....how much stuff and what stuff is controlable by you.

   Liked On: 23-01-2022, 04:54 PM

7. 
   Magnetite liked post by Pommy On thread : Full Length or Neck sizing. What is better and why?

   If you FL size with a minimal shoulder bump, you get all the advantages of neck sizing without any of the potential downsides. Your cases will always chamber and extract smoothly and they'll last...

   Liked On: 17-01-2022, 06:31 PM

8. 
   Magnetite liked post by charliehorse On thread : 6.5 Grendel load trouble shoot

   Quite a rewarding feeling that

   Liked On: 16-01-2022, 07:15 PM

9. 
   Magnetite liked post by Sh00ter On thread : Nortrack Precision Long Range Hunter Course, Review.

   You can contact Neil at CBT-TRACKER@hotmail.com Its like a shooting glove but it goes on your foot :D A cheap way to make a rear bag is from a sock.

   Liked On: 30-11-2021, 09:05 PM

10. 
    Magnetite liked post by Sh00ter On thread : Nortrack Precision Long Range Hunter Course, Review.

    I recently completed the Nortrack Precision long range hunter course. While I have been handling firearms for a long time. I am a novice at long range shooting, only having shot out to 500m in the...

    Liked On: 30-11-2021, 03:14 PM

11. 
    Magnetite liked post by Cigar On thread : Load checking changing primer lots.

    Yes, though I don't bother. But if the lots are 28 years apart (e.g. 1993 and 2021) I definitely would! The company have probably changed their production process, recipe or source of materials in...

    Liked On: 28-11-2021, 05:42 PM

12. 
    Magnetite liked post by zimmer On thread : Trying something, Eric Cortina method of load development

    I have used all sorts of methods - split case necks and close on long seated bullet, Stoney Point (now Hornady OAL gauge) method, Sinclairs tool for measuring seating depth (lies in cupboard unused),...

    Liked On: 19-11-2021, 10:13 AM

13. 
    Magnetite liked post by Flyblown On thread : Cartridge suggestions

    Yup, a .300 magnum, the .300 WSM is my pick. You need to revise your minimum impact velocity up from 2000 to 2400fps. Copper bullets are notoriously fickle when it comes to sufficient...

    Liked On: 11-11-2021, 03:52 PM

14. 
    Magnetite liked post by janleroux On thread : Rear bag rider

    A bag rider is supposed to give a bigger surface area to work with between the bag and your rifle. So if the rifle recoils, your stock will move backwards in a straight line which should allow you to...

    Liked On: 08-10-2021, 12:41 PM

15. 
    Magnetite liked post by Barefoot On thread : Rear bag rider

    Looks a little like a solution looking for a problem.

    Liked On: 07-10-2021, 05:35 PM

Page 5 of 7 First 1234567 Last

• Jump to page: