Marty Henry
Member

4588 Likes

Page 14 of 306 First 1234567891011121314151617181920212223242526272864114 ... Last

• Jump to page:

1. 
   Brian liked post by Marty Henry On thread : Who got the last laugh? You decide

   Good write up and honest about the misses. You don't mention calibre but I'm picking 708, 308 or similar by the drop you mention. Zeroing at 2 and a half or 3 inches high at 100 should give you...

   Liked On: 06-01-2024, 05:17 PM

2. 
   Micky Duck liked post by Marty Henry On thread : Who got the last laugh? You decide

   Good write up and honest about the misses. You don't mention calibre but I'm picking 708, 308 or similar by the drop you mention. Zeroing at 2 and a half or 3 inches high at 100 should give you...

   Liked On: 06-01-2024, 04:11 PM

3. 
   Maca49 liked post by Marty Henry On thread : Who got the last laugh? You decide

   Good write up and honest about the misses. You don't mention calibre but I'm picking 708, 308 or similar by the drop you mention. Zeroing at 2 and a half or 3 inches high at 100 should give you...

   Liked On: 06-01-2024, 04:09 PM

4. 
   Eat Meater liked post by Marty Henry On thread : Who got the last laugh? You decide

   Good write up and honest about the misses. You don't mention calibre but I'm picking 708, 308 or similar by the drop you mention. Zeroing at 2 and a half or 3 inches high at 100 should give you...

   Liked On: 06-01-2024, 03:52 PM

5. 
   Puffin liked post by Marty Henry On thread : Show me your knives

   Made by a friend who surprised me with at the beginning of a hunting trip. He also did the leatherwork. He's one of those clever bastards🙂 Got to use it same day. Feek it's sharp and holds it's edge.

   Liked On: 06-01-2024, 03:43 AM

6. 
   Bagheera liked post by Marty Henry On thread : Social influencers/bloggers/utubers and the effect they have on our sports

   Influencer, effluencer no difference.

   Liked On: 05-01-2024, 09:03 PM

7. 
   Rn-85 liked post by Marty Henry On thread : Social influencers/bloggers/utubers and the effect they have on our sports

   Influencer, effluencer no difference.

   Liked On: 05-01-2024, 11:38 AM

8. 
   tetawa liked post by Marty Henry On thread : Old Powder

   It's interesting that we are a bit vigilant re bulk powder but perhaps less so with loaded ammunition. Plenty of 80 or so years old mil surplus ammunition keeps appearing and getting used.

   Liked On: 04-01-2024, 03:09 PM

9. 
   Micky Duck liked post by Marty Henry On thread : New S&B scope

   And mil dots and a whole lot of other reticles. Range finders have meant that people have mostly forgotten how to do it.

   Liked On: 04-01-2024, 02:43 PM

10. 
    Micky Duck liked post by Marty Henry On thread : Old Powder

    It's interesting that we are a bit vigilant re bulk powder but perhaps less so with loaded ammunition. Plenty of 80 or so years old mil surplus ammunition keeps appearing and getting used.

    Liked On: 04-01-2024, 01:18 PM

11. 
    Finnwolf liked post by Marty Henry On thread : .223 Subsonic

    Practice putting the rifle to your shoulder with eyes closed, then open them and check your alignment with the sights adjust if needed and repeat, repeat, repeat. If using a scope be aware that...

    Liked On: 02-01-2024, 08:11 PM

12. 
    Micky Duck liked post by Marty Henry On thread : .223 Subsonic

    I've never played with reduced loads for jacketed bullets, but have shot a few cast ones. My thoughts are, cast lead either greased or powder coated has a high degree of lubricity (slipperyness) so...

    Liked On: 02-01-2024, 10:47 AM

13. 
    Micky Duck liked post by Marty Henry On thread : .223 Subsonic

    Note these loads are for cast lead not jacketed projectiles! It's such a shame that SR4759 is no longer made.

    Liked On: 02-01-2024, 09:45 AM

14. 
    veitnamcam liked post by Marty Henry On thread : Belmont subs

    Interesting I ran that and the grenhall that it's based on and both fail the 220 gr. You have to remember as rotational speed decreases gyroscopic stability does as well and it's common to see a...

    Liked On: 01-01-2024, 06:14 PM

15. 
    STC liked post by Marty Henry On thread : Belmont subs

    Interesting I ran that and the grenhall that it's based on and both fail the 220 gr. You have to remember as rotational speed decreases gyroscopic stability does as well and it's common to see a...

    Liked On: 01-01-2024, 05:08 PM

Page 14 of 306 First 1234567891011121314151617181920212223242526272864114 ... Last

• Jump to page: