They used to start with a block of steel and mill off all the bits that didn't look like a rifle is a description I've heard for that kind of workmanship.
Liked On: 29-06-2023, 06:15 PM
Always a possibility when the bullet leaves the barrel at about 400,000 rpm could be messy inside a suppressor
Liked On: 28-06-2023, 01:18 PM
No they are a registered club, individual branches are also supposed to have registered as clubs as well and then if they have their own range register that separately or if they shoot on one they...
Liked On: 27-06-2023, 11:52 PM
I use cbc brass in my 16 gauge cape rifle,16 gauge wads don't work as the brass is much thinner than a plastic or paper shell so I had to make a was punch. On the bright side my cases have lasted ...
Liked On: 27-06-2023, 10:25 PM
The only thing "wrong" I can see is they fell into the track rather than staying up on the lip. Good work anyway (-:
Liked On: 27-06-2023, 05:34 PM
It's a weird way of describing it. With typical military fmj the cup is drawn from front to back the core inserted from the rear and swagged leaving the a small section of the core exposed it your...
Liked On: 27-06-2023, 09:32 AM
Reloading is excluded and ammunition purchases don't become a trigger event for another year or two at this stage.
Liked On: 26-06-2023, 08:24 PM
The only thing "wrong" I can see is they fell into the track rather than staying up on the lip. Good work anyway (-:
Liked On: 26-06-2023, 11:45 AM
The only thing "wrong" I can see is they fell into the track rather than staying up on the lip. Good work anyway (-:
Liked On: 26-06-2023, 08:51 AM
To clean sewer pipe bores I've used "bullets" of steel wool and pistol powder that shifts rust, carbon, copper, and mason bee clay very very effectively showing you what you have very quickly...
Liked On: 24-06-2023, 07:13 PM
When I reloaded for this cal 2206h and the sierra 55 grain hollow point boat tail, flattened everything out to 200 yards. The pill has a hole the size of lake Taupo in the front so ballistically it's...
Liked On: 22-06-2023, 06:29 PM
I stopped loading 223 after I tried some Belmont black. Yes I could load slightly faster and slightly more accurate ammunition but was an incremental improvement, and when the factory loaded...
Liked On: 22-06-2023, 04:18 PM
I stopped loading 223 after I tried some Belmont black. Yes I could load slightly faster and slightly more accurate ammunition but was an incremental improvement, and when the factory loaded...
Liked On: 22-06-2023, 03:44 PM
Fark, last year 3 of us managed 25 one night spotlighting, the eyes arent that reflective but with a thermal the heads really stand out. Pitty the things are so expensive if they were rentable we...
Liked On: 21-06-2023, 12:30 PM
Quite clever, I have an array of sized cases with slightly flared mouths and the base cut off and use them pretty much the same way except I just keep the bullets going in and pick the lubed ones off...
Liked On: 20-06-2023, 04:10 PM