Mathias
Member

2799 Likes

Page 51 of 187 First ... 3738394041424344454647484950515253545556575859606162636465101151 ... Last

• Jump to page:

1. 
   BSA liked post by Mathias On thread : D4D engine oil

   Yep, look up your manual. I've got the same vehicle & run Total 5W-30 synthetic, as we have it at work in bulk. You can run 15W-40 as the heaviest from memory and there's nothing wrong with Castrol,...

   Liked On: 01-08-2022, 08:46 AM

2. 
   Tikka7mm08 liked post by Mathias On thread : Tikka Veil Factory Stock Weight

   Should be the same, the above stock is only a factory painted T3X stock.

   Liked On: 01-08-2022, 08:46 AM

3. 
   Shamus_ liked post by Mathias On thread : Tikka Veil Factory Stock Weight

   Should be the same, the above stock is only a factory painted T3X stock.

   Liked On: 01-08-2022, 08:28 AM

4. 
   superdiver liked post by Mathias On thread : Walnut and blued steel,

   BSA Viscount 7x57, reasonably tidy original piece wearing a first gen shiny 2.5-8 Leupold. https://uploads.tapatalk-cdn.com/20220521/840146ca426a856dabdcdf3df3fca23e.jpg Sent from my SM-A530F...

   Liked On: 31-07-2022, 09:02 AM

5. 
   Buckslyr liked post by Mathias On thread : Hello from the US 👋🏻

   Welcome Chase Sent from my SM-A530F using Tapatalk

   Liked On: 31-07-2022, 08:46 AM

6. 
   timattalon liked post by Mathias On thread : Classic car Rego

   Yep, 40yrs. Applies to motorbikes etc as well. Sent from my SM-A530F using Tapatalk

   Liked On: 30-07-2022, 01:41 PM

7. 
   Trout liked post by Mathias On thread : Old huts

   Washbourne Hut Upper Rakaia River. If you look on the outside walls near the door there's musterers names written in pencil from over 100yrs ago.

   Liked On: 29-07-2022, 09:48 AM

8. 
   Tikka7mm08 liked post by Mathias On thread : 6.5 PRC Load Development Begins

   True, my 260Imp is running about 10gr less RL26 for similar speed. You should be ok for up to 59gr, going by another PRC & RL26 that I know of.

   Liked On: 23-07-2022, 12:36 PM

9. 
   Micky Duck liked post by Mathias On thread : Howa Trigger

   Absolutely, if I can I'll replace with a 2 stage trigger. I feel that I'm in much better control. Sent from my SM-A530F using Tapatalk

   Liked On: 19-07-2022, 03:28 PM

10. 
    Moa Hunter liked post by Mathias On thread : New Hilux Fuel Consumption

    I'm at 105kph, same model but 2015. Doubt it's a different ratio. Sent from my SM-A530F using Tapatalk

    Liked On: 15-07-2022, 11:16 PM

11. 
    Micky Duck liked post by Mathias On thread : Anyone been up the godley in the last month or so

    Yeah the mid Wilberforce & Mathias were dry up until a few hours ago. Should drop just as quick, but as gimp said...stay away & let it drop. Sent from my SM-A530F using Tapatalk

    Liked On: 15-07-2022, 10:17 PM

12. 
    Hunter_Nick liked post by Mathias On thread : Walnut stock build (done the traditional way)

    Thanks for the Sunday morning gun porn Nick. That's lovely & I hope its taken soon to reward you for your talent.

    Liked On: 10-07-2022, 10:46 AM

13. 
    nor-west liked post by Mathias On thread : Trigger adjustment Remington 700

    nor-west Read about them here before you do too much to it. Trigger Springs|Aluminum Pillar|Pillar Bedding|Gunsmithing (http://erniethegunsmith.com/) The X Mark has two springs and basically the...

    Liked On: 05-07-2022, 11:12 AM

14. 
    Trout liked post by Mathias On thread : Trigger adjustment Remington 700

    nor-west Read about them here before you do too much to it. Trigger Springs|Aluminum Pillar|Pillar Bedding|Gunsmithing (http://erniethegunsmith.com/) The X Mark has two springs and basically the...

    Liked On: 05-07-2022, 08:26 AM

15. 
    No.3 liked post by Mathias On thread : trailer breaks/kits

    Very true, NZTA have left it way too long to address the ruling and now it'll be a huge expense to the tax payer to put it in a more workable format. There is talk & plans of alignment with NZ...

    Liked On: 21-06-2022, 11:14 AM

Page 51 of 187 First ... 3738394041424344454647484950515253545556575859606162636465101151 ... Last

• Jump to page: