McNotty
Member

264 Likes

Page 12 of 18 First 123456789101112131415161718 Last

• Jump to page:

1. 
   McNotty liked post by 300_BLK On thread : 18" 6.5 PRC

   stagstalker

   Liked On: 18-02-2020, 11:06 AM

2. 
   McNotty liked post by Mathias On thread : Short Barrel Syndrome.

   Dont forget most regions have extreme fire risk at the moment....[emoji1] Sent from my SM-A530F using Tapatalk

   Liked On: 17-02-2020, 09:19 PM

3. 
   McNotty liked post by Uplandstalker On thread : Short Barrel Syndrome.

   Sound good reading in that lot. I'm about to cut a 270WSM to 17 or 18 inches, a Super Bushpig. Should be a hoot!

   Liked On: 17-02-2020, 09:18 PM

4. 
   McNotty liked post by TeRei On thread : Investigating Quad Bikes

   TRX 350 2005 model. Done lotsa back country work and hauled many big stags. Never misses a beat. Servicing is the big thing and not letting anyone else ride it.

   Liked On: 15-02-2020, 01:33 AM

5. 
   McNotty liked post by 7mmsaum On thread : Bry Lubricating necks when seating

   Lube the necks It allows less stiction so you can get the ZCL length the same on each loaded round It can also prevent galvanic corrosion between the two dissimilar metals, this can cause...

   Liked On: 05-02-2020, 08:21 AM

6. 
   McNotty liked post by Uplandstalker On thread : Remington 700 from 308 to 6.5CM Criterion prefit barrel quick job report

   I fitted a 6XC prefit Criterion barrel at home in the shed last year. Was a Model 7 action. I didnt have any fancy gauges, so headspaced for a sized case. It's a dream to shoot! Fast barrel too. I...

   Liked On: 05-02-2020, 08:07 AM

7. 
   McNotty liked post by 25 /08 IMP On thread : 155gr Amax in 300 WSM

   I tried RL26 and superprofrmance both shot well with same speed but don't want to use my RL26 on others people's rifles. Sent from my CPH1903 using Tapatalk

   Liked On: 04-02-2020, 09:39 AM

8. 
   McNotty liked post by Ryan_Songhurst On thread : 155gr Amax in 300 WSM

   I use them in my 308, only doing 2740fps and I've only shot one deer, at 330yds, bang flop, so they work well enough :)

   Liked On: 04-02-2020, 08:56 AM

9. 
   McNotty liked post by Wingman On thread : Attempting a new .224 wildcat

   I have had a few private messages with questions in regards to this build and how the barrel life etc was holding up so I figured Id do an update here too. The barrel is still going strong...

   Liked On: 03-02-2020, 11:25 AM

10. 
    McNotty liked post by 2post On thread : gooses

    I’m just across the harbour from you then. These were all for kotuku though:P

    Liked On: 01-02-2020, 08:20 PM

11. 
    McNotty liked post by gadgetman On thread : Spotted a Layout Blind for sale

    Posted a link in the for sale section.

    Liked On: 01-02-2020, 07:56 PM

12. 
    McNotty liked post by 2post On thread : gooses

    129400 They are flying your way kotuku

    Liked On: 01-02-2020, 07:51 PM

13. 
    McNotty liked post by Puffin On thread : . 284 Winchester

    Recently I plugged in some numbers to see what difference QuickLOAD calculated in muzzle velocities between the .280AI and the .284Win, as I'm also thinking of making a change, from the one to the...

    Liked On: 30-01-2020, 11:48 PM

14. 
    McNotty liked post by mudgripz On thread : All things Maxtoch..

    Good to see the gear working well 7/10ths. A quick comment - Brian and I into planning of new generation lights. These will not be under Maxtoch name or anything to do with them. Looking into NZ...

    Liked On: 29-01-2020, 07:43 AM

15. 
    McNotty liked post by Tahr On thread : First hunt 2020

    Mines a 20" barrel and its so efficient it still hurls a big lump of lead at a great speed :)

    Liked On: 08-01-2020, 08:05 PM

Page 12 of 18 First 123456789101112131415161718 Last

• Jump to page: