MGNZ
Member

98 Likes

Page 4 of 7 First 1234567 Last

• Jump to page:

1. 
   takbok liked post by MGNZ On thread : DIY Induction Annealer

   Hi 300CALMAN, some pics below of the inside and arduino pinout and also some links to the bits from aliexpress and the software source. ZVS induction board...

   Liked On: 31-03-2020, 11:34 PM

2. 
   takbok liked post by MGNZ On thread : DIY Induction Annealer

   If anyone's interested, got the timing dialed in for 223, 308, 270 & 300WM. Yellow is 650F and white is 450F. https://farm1.staticflickr.com/879/41642280541_50b0af814b_b.jpg

   Liked On: 31-03-2020, 11:34 PM

3. 
   johnd liked post by MGNZ On thread : DIY Induction Annealer

   I've been getting quite a few questions from members wanting to build an annealer like this one and most people seem very capable of building everything, but the electronic controller is the hurdle....

   Liked On: 28-03-2020, 08:16 PM

4. 
   rewa liked post by MGNZ On thread : 162gn ELDX not expanding

   sectioned the 178 30 cal yesterday for my own interest. It would actually be a pretty handy thread to start for choosing a projectile for load dev - not just ELD-X's but all popular projectiles. ...

   Liked On: 15-04-2019, 09:42 PM

5. 
   dannyb liked post by MGNZ On thread : 162gn ELDX not expanding

   sectioned the 178 30 cal yesterday for my own interest. It would actually be a pretty handy thread to start for choosing a projectile for load dev - not just ELD-X's but all popular projectiles. ...

   Liked On: 14-04-2019, 11:00 PM

6. 
   Mooseman liked post by MGNZ On thread : 162gn ELDX not expanding

   Neither of them took a single step - so at those 400+ yard ranges (2500fps and lower for me) the ELD-X delivered.

   Liked On: 12-04-2019, 01:11 PM

7. 
   dannyb liked post by MGNZ On thread : 162gn ELDX not expanding

   Neither of them took a single step - so at those 400+ yard ranges (2500fps and lower for me) the ELD-X delivered.

   Liked On: 12-04-2019, 08:52 AM

8. 
   csmiffy liked post by MGNZ On thread : The Lever Aficionados Thread

   How did I miss this... Awesome Thread! my Savage 99e 308w https://farm2.staticflickr.com/1955/30767801797_ca450d7633_h.jpg

   Liked On: 04-11-2018, 07:03 PM

9. 
   Barefoot liked post by MGNZ On thread : The Lever Aficionados Thread

   How did I miss this... Awesome Thread! my Savage 99e 308w https://farm2.staticflickr.com/1955/30767801797_ca450d7633_h.jpg

   Liked On: 04-11-2018, 06:55 PM

10. 
    john m liked post by MGNZ On thread : The Lever Aficionados Thread

    How did I miss this... Awesome Thread! my Savage 99e 308w https://farm2.staticflickr.com/1955/30767801797_ca450d7633_h.jpg

    Liked On: 04-11-2018, 06:42 PM

11. 
    Bernie liked post by MGNZ On thread : 3D print extended Tikka T3 Magazine

    First print came out OK. needs a bit of refining, but the magazine functions. 88817

    Liked On: 09-06-2018, 06:00 PM

12. 
    wsm junkie liked post by MGNZ On thread : 3D print extended Tikka T3 Magazine

    First print came out OK. needs a bit of refining, but the magazine functions. 88817

    Liked On: 05-06-2018, 09:26 PM

13. 
    sometimes liked post by MGNZ On thread : 3D print extended Tikka T3 Magazine

    First print came out OK. needs a bit of refining, but the magazine functions. 88817

    Liked On: 05-06-2018, 08:05 PM

14. 
    Willus liked post by MGNZ On thread : 3D print extended Tikka T3 Magazine

    First print came out OK. needs a bit of refining, but the magazine functions. 88817

    Liked On: 05-06-2018, 08:03 PM

15. 
    stug liked post by MGNZ On thread : 3D print extended Tikka T3 Magazine

    First print came out OK. needs a bit of refining, but the magazine functions. 88817

    Liked On: 05-06-2018, 07:42 PM

Page 4 of 7 First 1234567 Last

• Jump to page: