Yep. Now if was a percentage of bullets that hit the target Id say it would be the other way.
Liked On: 05-08-2018, 01:20 PM
There are a lot more FAL holders than soldiers though in NZ VC. That said we don't do the same sort of shooting that they would have been doing during a night live fire. I have seen the sky alight...
Liked On: 05-08-2018, 01:19 PM
I think your bang on with the sako bavarian idea Josh in any caliber I nicer gun to hand down to his kids would be hard to find. Sent from my SM-G960F using Tapatalk
Liked On: 05-08-2018, 01:15 PM
'Stalingrad' Rossi, that would be a very very solid rest indeed. You must have in mind to fire some full powered loads with the 45/70 pray tell ? Sadly though, it seems that books that make the best...
Liked On: 05-08-2018, 10:52 AM
Not one but THREE in a row! Replaced not repaired each time, Time the fourth one arrived I told them to put it on there shelf and credit me its cost against a shiny new vx3 and lived happily ever...
Liked On: 05-08-2018, 10:48 AM
He, he. Mate with the 10/22 in our crew was a frustrated with his semi shooting from the truck. By the time he got within his accuracy range everything had been cleaned up with the JW15's and...
Liked On: 03-08-2018, 01:26 PM
With nearly 5000 rabbits shot in just over two years I think I know more about the abilities and killing power of a .22 than most shooters. If you take three shots to kill a Rabbit I suggest you may...
Liked On: 03-08-2018, 01:24 PM
Are you sure you want a 10/22 Viper? Good little carbine design but you will have to deal with the accuracy limitation, and sooner or later everyone starts to want accuracy. Have had 5-6 10/22s...
Liked On: 03-08-2018, 01:23 PM
7mm Rem Mag thanks for your thoughts. Over here in Central isn't all big gully,s . There is some very tight shooting among lupin's , matagouri and brair . It's more of a case of right tool for the...
Liked On: 03-08-2018, 01:20 PM
finally got around to looking at the Leupold Freedom range of scopes, the 1.5-4X20 with the Ballistic Reticle & dialable looks good berg243 . . . look forward to seeing how you go with it. ...
Liked On: 03-08-2018, 01:00 PM
After being inspired by rossi.45 and this thread I have got the big and slow bug. Got a mold from CBE in Australia and cast up these 405 grain bullets after doing quite a bit of reading and...
Liked On: 03-08-2018, 12:59 PM
I've sold those rifles and now have a 7x65R shooting, surprise surprise, 162 amax. Haven't had a chance to work up a 160 accubond load, but the amax are starting at only 2750, compared to 3050 so I...
Liked On: 03-08-2018, 12:55 PM
Agree on the poor shooting technique MD, even the ad clip shows poor technique, with a right handed shooter shooting off the left side of a tree with his fingertips as support. He should be shooting...
Liked On: 03-08-2018, 12:55 PM
For my 7mm mag and 7SAUM I worked up 2 loads. I worked up the long range load and zeroed my scope using that load, a 162 a-max. I then worked up a close range load, 160 or 140 accubond. I tested them...
Liked On: 03-08-2018, 12:54 PM
Bought this off Dreamer a week or two back, T3 in 6.5x55, DPT suppressor, Southfort Labs NZ Hunter carbon stock, have just put a VX5 on it in Talleys and added Atlasworks alloy bottom metal and bolt...
Liked On: 03-08-2018, 10:20 AM