Mills
Member

8 Likes

1. 
   Mills liked post by TLB On thread : Short barrelled 300WM performance

   https://rifleshooter.com/2013/12/300-winchester-magnum-how-does-barrel-length-change-velocity-a-16-300-win-mag/ Some real world data. They have done a few calibers. I cut just about everything...

   Liked On: 15-08-2022, 01:10 PM

2. 
   Mills liked post by Mooseman On thread : Short barrelled 300WM performance

   I had mine cut to 22 inch and suppressed, I now get 2900 fps with the 190 gr LRAB and 2840 fps with the 200 gr ELDX. Didn't want to cut to short as it's a magnum at the end of the day, otherwise...

   Liked On: 14-08-2022, 10:05 PM

3. 
   Mills liked post by 7mmsaum On thread : Short barrelled 300WM performance

   Use the 178 eldx

   Liked On: 14-08-2022, 10:04 PM

4. 
   Mills liked post by silentscope On thread : Short barrelled 300WM performance

   20 is a handy length, iv got a Gunworks 12 inch maximus suppressor (pretty sure it is anyway iv had it a long time now) my load is 77grains of 2217. its been my go to rifle for more than 10 years....

   Liked On: 14-08-2022, 10:04 PM

5. 
   Mills liked post by dannyb On thread : Short barrelled 300WM performance

   I run a 19" 300wsm with 178 eldm's its a pretty sweet set up 2782fps not hot load at all but super accurate ragged 1 hole 3 shot groups are the norm at 100y

   Liked On: 14-08-2022, 09:26 PM

6. 
   Mills liked post by chainsaw On thread : STAGS SHOT 2021

   Stag from this years roar all cleaned up Euro mount.175028

   Liked On: 14-08-2021, 11:11 PM

7. 
   Mills liked post by Friwi On thread : Gun of the week

   So this week we have a new Mauser M18 in 6.5 PRC . The scope rail on the top is one of our DPT 20 MOA rail for Remington Long Action which fits perfectly. 129686 129687

   Liked On: 30-06-2020, 12:17 PM

8. 
   Mills liked post by mawzer308 On thread : 2020 SHOT STAGS

   Pretty happy with this fella taken this morning, still hee-hawing. Very exciting and nerve racking stalk. 141877

   Liked On: 06-06-2020, 04:56 PM