mimms2
Banned

1231 Likes

Page 71 of 83 First ... 21575859606162636465666768697071727374757677787980818283 Last

• Jump to page:

1. 
   mimms2 liked post by Dead is better On thread : Longbow practice

   Anybody else a closet longbow owner? Been a good few years since have a good practice session 135169 135170

   Liked On: 06-04-2020, 10:07 AM

2. 
   mimms2 liked post by Coote On thread : What are the best cuts of meat from a possum ?

   I've eaten a lot of possum and I rate it fairly highly. Like someone mentioned earlier it is best to cut out the two glands filled with the thick white, stinky fluid in the soft flesh under the...

   Liked On: 06-04-2020, 07:46 AM

3. 
   mimms2 liked post by Cordite On thread : Tinting epoxy

   Charcoal should do it and should add rigidity. A problem with pure epoxy can be is creep, especially at higher temperatures. The ancient Neanderthalers used an advanced mixture of birch bark...

   Liked On: 05-04-2020, 09:03 AM

4. 
   mimms2 liked post by southernman On thread : Lets See The Transport havn a Oops moment

   135068135069, Pulling the engine/ alternator out of a Komatsu 930, alternator failing, -40, 135070135071 diff and transmission, on a Cat 793 haul truck, cracked diff case.

   Liked On: 05-04-2020, 06:34 AM

5. 
   mimms2 liked post by PaulNZ On thread : Walnut Stock Build

   I wasn’t going to make this thread until I was a bit further along, however perhaps with the current lockdown now’s a good time. I know I appreciate reading similar threads created by other members –...

   Liked On: 02-04-2020, 06:14 PM

6. 
   mimms2 liked post by Woody On thread : Sporterised Lee Enfields - accuracy ??

   I had a few new ex army 303's back in 1960's. Used apeture sights on two that I shot out and then a 2 1/2 power bushnel onthe last one. I shot several Tahr and chamois at 2-400 yards with that rifle...

   Liked On: 31-03-2020, 09:12 PM

7. 
   mimms2 liked post by Klhari On thread : Sporterised Lee Enfields - accuracy ??

   I've done a few and given that the barrel is still good, accuracy is normally quite good. My dad's no4 mk2 would group well under 1 MOA all day long. I would normally cut three inches off the...

   Liked On: 31-03-2020, 08:05 PM

8. 
   mimms2 liked post by hotbarrels On thread : 22mag vs 17hmr

   Side by side, from the shooters perspective, the .17HMR is quieter. From the target end of the gun 100m out, dB seems the same, just a different pitch.

   Liked On: 31-03-2020, 04:05 PM

9. 
   mimms2 liked post by nick On thread : Projectile that won't make a mess

   Head shoot them:)

   Liked On: 30-03-2020, 01:04 PM

10. 
    mimms2 liked post by On thread : flat tyre quad bike

    i use to use one of those kits that have like a string impregnated with glue that you put in holes with a special tool

    Liked On: 29-03-2020, 09:41 PM

11. 
    mimms2 liked post by Cigar On thread : Old primers

    I have some that are 22+ years old but haven't bothered using them for the sake of a few cents each for new ones. I suspect they would still be okay, but I'd fire a few primed cases to check before...

    Liked On: 29-03-2020, 09:40 PM

12. 
    mimms2 liked post by sdogg73 On thread : New to reloading and have some questions

    Are you having trouble with cases going into the die or coming out of the die? If it's going in, it won't be the decapping/sizing mandrel giving resistance, it'll be too little lube on the neck or...

    Liked On: 29-03-2020, 10:27 AM

13. 
    mimms2 liked post by Maca49 On thread : Total lock down in 48hours

    Where the the fcuk are the three commercial passenger planes, I saw,that flew outa Tauranga yesterday going and what passengers are they carrying? Is this lock down for all or not!

    Liked On: 29-03-2020, 08:12 AM

14. 
    mimms2 liked post by wsm junkie On thread : Photos of your dog

    This is my new mate....Moose He's a 9 week old vizsla heading dog cross 134199

    Liked On: 28-03-2020, 08:39 PM

15. 
    mimms2 liked post by 7mmsaum On thread : Polishing brass

    Stainless media in a tumbler

    Liked On: 28-03-2020, 12:02 PM

Page 71 of 83 First ... 21575859606162636465666768697071727374757677787980818283 Last

• Jump to page: