About mimms2

Basic Information


About mimms2
Location:
Tai Tokerau
Occupation:
For Hire

Statistics


Total Posts
Total Posts
5,863
Posts Per Day
3.49
General Information
Last Activity
18-12-2021 06:10 AM
Join Date
24-09-2019
Referrals
1

1231 Likes

  1. mimms2
    mimms2 liked post by PerazziSC3 On thread : Twist rate relative to barrel length
    I have a 1:11 twist which I have just confirmed stabilizes 190 sub-x right down to 630fps. Its factory length maybe 22-24". My question is will cutting the barrel to 15" change the stabilization?...
    Liked On: 16-10-2021, 05:41 PM
  2. mimms2
    mimms2 liked post by Chur Bay On thread : Holiday Mish
    We were supposed to go up North in the second week of the holidays but that couldnt happen, so Oliver and I went hunting instead. We picked it good. If we have left it any later we would have been...
    Liked On: 14-10-2021, 01:01 PM
  3. mimms2
    mimms2 liked post by Northkiwi On thread : Idoits that get firearm licences
    One I’ve seen a few times in huts is where guys chamber a bolt action round when unloading or hunting half cock. Don’t push bolt down, thereby on many actions the ejector doesn’t pick the round up...
    Liked On: 14-10-2021, 12:53 PM
  4. mimms2
    mimms2 liked post by gundoc On thread : Putting vent rib on a shotgun barrel?
    A5's are long recoil and the rib must be brazed to withstand the forces on the reciprocating barrel. This can only be done at the factory in a purpose-built jig to prevent warping the barrel. Many...
    Liked On: 12-10-2021, 08:26 AM
  5. mimms2
    mimms2 liked post by timattalon On thread : goat stew differing results, any ideas ?
    dannyb Yogiji's in Sydenham (used to be by south city) is a great market for curry powder, spices and mixes etc. Indian supermarket. Last time I went to Pak n save currie powder was a few dollars a...
    Liked On: 11-10-2021, 02:50 AM
  6. mimms2
    mimms2 liked post by Jhon On thread : goat stew differing results, any ideas ?
    Any meat can be cooked tender if you cook it slow and keep it moist. Fat and connective tissue helps keeps meat moist and tender..why cuts like shoulder and shin or shank meat, brisket and short...
    Liked On: 11-10-2021, 02:48 AM
  7. mimms2
    mimms2 liked post by hotbarrels On thread : goat stew differing results, any ideas ?
    I cook a lot of venison and goat stews, and the best cut of all is the shanks, but not whole. I freeze them as a whole shank. Then just before cooking, I remove the shank(s) from the freezer and...
    Liked On: 10-10-2021, 04:10 PM
  8. mimms2
    mimms2 liked post by Ingrid 51 On thread : goat stew differing results, any ideas ?
    Goat I’ve used has generally been treated thus. First method is to soak in water with a good glug of white vinegar as it removes gamey taste somewhat and can lighten meat colour. Another method is to...
    Liked On: 10-10-2021, 04:09 PM
  9. mimms2
    mimms2 liked post by Tahr On thread : 223 longe bullets
    If you use the 77 grn Sierra Tipped they are designed to shoot well at the short 2.3" OAL length of a MSSA mag. That is also the mag length of a short Tikka so they go well out of them (1:8 twist). ...
    Liked On: 10-10-2021, 10:29 AM
  10. mimms2
    mimms2 liked post by Micky Duck On thread : How old is too late for training? GSP pup
    you missed out on all the puppy fun/love...but if has been on farm and well socialized with other dogs,you are ahead in some ways..no trained at all???? it must come when called or it would never...
    Liked On: 05-10-2021, 08:26 PM
  11. mimms2
    mimms2 liked post by Chur Bay On thread : How old is too late for training? GSP pup
    Definitely not too late. I started my dog at 2.
    Liked On: 05-10-2021, 08:25 PM
  12. mimms2
    mimms2 liked post by mikee On thread : How old is too late for training? GSP pup
    never too late as long as you have patience and persistence and are not a scone do'oer cause that rubbs off on the dog. Only issue I see is won't be house trained but even thats not hard assuming...
    Liked On: 05-10-2021, 08:25 PM
  13. mimms2
    mimms2 liked post by Harryg On thread : Popping smoker fix?
    Try pre heating your smoker. The popping will be caused by expansion of the metal
    Liked On: 04-10-2021, 08:09 PM
  14. mimms2
    mimms2 liked post by 199p On thread : How's this for a deterrent ?
    feel for the cops they do all the leg work and judge has no balls
    Liked On: 04-10-2021, 06:57 PM
  15. mimms2
    mimms2 liked post by Finnwolf On thread : How's this for a deterrent ?
    Hard to blame cops for a judge’s decision. And the poor chap will now get the support and counseling he desperately needs and deserves…:ORLY:
    Liked On: 04-10-2021, 06:57 PM

20-10-2020


18-10-2020


17-10-2020


16-10-2020


14-10-2020


12-10-2020


02-10-2020


24-09-2020


23-09-2020


15-09-2020


13-09-2020


11-09-2020



No results to display...
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!