Greetings Blackfern, You certainly have done your homework. I recently loaded 42.5 grains of AR2208 behind the 140 grain Remington Corelokt which is below max in the Hodgdon data for the 139 grain...
Liked On: 23-08-2023, 09:38 AM
First time fishing for a while as I have been skiing up a storm, but popped over to the mouth of the Matukituki this arvo and picked up a nice rainbow. Ate him for dinner. 231610
Liked On: 23-08-2023, 01:03 AM
Not hot til ya gotta kick the bolt open
Liked On: 23-08-2023, 01:00 AM
The later surfs, RZN185 and KZN185 both used a Prado chassis, prior to that it was a hilux chassis. I had both a 2.7L petrol and the 3L turbo surf, I found both nice to drive. Both of thier first...
Liked On: 22-08-2023, 10:18 PM
Photo of coreflute targethttps://uploads.tapatalk-cdn.com/20230822/afe615611aea8589e9dccb1d0c7e98fc.jpg Sent from my CPH2145 using Tapatalk
Liked On: 22-08-2023, 10:01 PM
OK, so after many years of wanting to reload i finally got my ass into gear and collected the required kit with a bit of trading and bargain hunting here there and every where. I have wanted to...
Liked On: 22-08-2023, 10:00 PM
prado over a surf imo. unless its a older surf with solid front and rear! I had a 80 series cruiser for about 8 years, then sold it as it felt too old. brought the same year patrol, and everything...
Liked On: 22-08-2023, 04:41 PM
Greetings All, I think the first thing to do in dealing with sizing problems is to understand what the problem is. Nine times out of ten a tight case is due to the case not having been sized enough....
Liked On: 22-08-2023, 10:04 AM
I had a bit of down time in the workshop while I wait for my 222 Rimmed projects retaining compound to cure So I ripped into this Stevens 044 1/2 32 Long rimfire. Converted the breech block...
Liked On: 22-08-2023, 09:43 AM
I decided a while ago to invest in a high quality fixed blade. I was using the replaceable blade models, but didn't feel good about throwing away blades and they were so sharp, they felt dangerous. ...
Liked On: 21-08-2023, 11:12 PM
Irrespective of the sharpener you get - buy yourself a good quality steel. Not the "NZ Rabbiter" one that is rougher than a rat-tailed file , you need the one they use in the meatworks that is...
Liked On: 21-08-2023, 11:09 PM
when its worn..throw it away and buy new one.....whiltshire made a straight edged black handled,kitchen knife in orange and white holder with the V bit built in....it eventually created a 45 degree...
Liked On: 21-08-2023, 11:08 PM
depends if the old fella is any good with an oil stone or not.... one of the diamond/oval steels is a good idea,you can spend serious money on a scarey sharp of warthog system...or smaller amount on...
Liked On: 21-08-2023, 11:06 PM
more for not getting t boned at intersections if you want good mirrors the 84 up landrover defender units are great hold adjustment and fold into body when in the bush .
Liked On: 21-08-2023, 11:03 PM
I wouldn't bother using 4H lock for normal gravel road driving, just slippery places where there is a chance of getting stuck. You can slightly apply the handbrake when you're stuck and it works a...
Liked On: 21-08-2023, 03:51 PM