NAKED_GOOSE
Member

268 Likes

Page 5 of 18 First 123456789101112131415161718 Last

• Jump to page:

1. 
   NAKED_GOOSE liked post by blip On thread : Winchester 1892 hammer won’t cock back with lever after disassembly

   Chalk?

   Liked On: 03-11-2023, 02:05 PM

2. 
   NAKED_GOOSE liked post by JohnDuxbury On thread : Winchester 1892 hammer won’t cock back with lever after disassembly

   The first rule is you dont take a Winchester 92 apart unless you drop it in the ocean. You will have to take it apart again and put it back together once more, you have not assembled it right. I have...

   Liked On: 03-11-2023, 07:15 AM

3. 
   NAKED_GOOSE liked post by BSA On thread : Winchester 1892 hammer won’t cock back with lever after disassembly

   Intriguing, a mate of mine said they can be a bit tricky to re-assemble but I've never taken mine apart, I just clean, oil, shoot.

   Liked On: 02-11-2023, 06:50 PM

4. 
   NAKED_GOOSE liked post by Waynesworld On thread : Winchester 1892 hammer won’t cock back with lever after disassembly

   Giving that the stock is affecting it.....sounds like the hammer spring is not right. I will PM you a PDF schematic.

   Liked On: 02-11-2023, 06:50 PM

5. 
   NAKED_GOOSE liked post by BSA On thread : Winchester 1892 hammer won’t cock back with lever after disassembly

   You Tube vids might help maybe.. https://www.youtube.com/watch?v=OraqUbTNTZ8 https://www.youtube.com/watch?v=lHnS7cAc_Z0

   Liked On: 02-11-2023, 05:51 PM

6. 
   NAKED_GOOSE liked post by 7mmsaum On thread : Pukeko recipes?

   Recipe 1. first look for a small stone that will sit in the bottom of the pot :)

   Liked On: 01-11-2023, 07:25 PM

7. 
   NAKED_GOOSE liked post by Marty Henry On thread : My night vision experiance

   And I thought this was going to be about eating carrots

   Liked On: 29-10-2023, 02:27 PM

8. 
   NAKED_GOOSE liked post by blip On thread : My night vision experiance

   236250

   Liked On: 29-10-2023, 02:26 PM

9. 
   NAKED_GOOSE liked post by Oldbloke On thread : DIY Fibre wads?

   Cant say. Always used cardboard but not for BP. Seemed to work. But known blokes to use leather. I think back then they just used what you had.

   Liked On: 28-10-2023, 07:00 PM

10. 
    NAKED_GOOSE liked post by Micky Duck On thread : DIY Fibre wads?

    so thats with black powder..equal measure of shot and powder BY VOLUME ..less shot= faster n looser pattern less powder = slower and tighter so IN THEORY if you dropped two measures of shot into...

    Liked On: 28-10-2023, 10:27 AM

11. 
    NAKED_GOOSE liked post by zimmer On thread : Mounting a press

    Nice loading block

    Liked On: 28-10-2023, 10:26 AM

12. 
    NAKED_GOOSE liked post by Oldbloke On thread : DIY Fibre wads?

    Any old leather will work too. I have just used cardboard boxes.

    Liked On: 27-10-2023, 09:35 AM

13. 
    NAKED_GOOSE liked post by 11mms On thread : DIY Fibre wads?

    If you have longer forcing cones you may pattern better/ prevent blow by by increasing wad diameter used

    Liked On: 27-10-2023, 09:35 AM

14. 
    NAKED_GOOSE liked post by 11mms On thread : DIY Fibre wads?

    Just a quick drain-dump of what I think I know: Old wool felt jackets and hats can be found at op-shops and normally come 1/8" - 3/8" think And a good coat will last quite a while! My lube is a...

    Liked On: 27-10-2023, 09:34 AM

15. 
    NAKED_GOOSE liked post by akaroa1 On thread : DIY Fibre wads?

    From memory roll width was 900mm and minimum cut length was 500mm A good size chunk that will make many hundred wads. I use the 9.5mm grey for all my felt wad needs With a good punch, decent...

    Liked On: 26-10-2023, 04:30 PM

Page 5 of 18 First 123456789101112131415161718 Last

• Jump to page: