And a picture of the rifle for some reference, Its a Izhmash Bars 4-1, little rough around the edges, has had the barrel shortened to 16" and threaded but soon to have a suppressor on there. 248403
Liked On: 20-04-2024, 02:31 PM
Right, After a fair bit of faffing I've finally got some loaded rounds together, 20gr of 2206H topped with a 50gr super explodey, loaded to 51mm OAL, will take them out and see what happens once...
Liked On: 20-04-2024, 02:13 PM
I have ordered the spsx, mainly due to them being cheaper by about $10 per packet than the other 50gr projectiles on offer, I'll certainly be referring to them as super explodies :XD: I have about...
Liked On: 20-04-2024, 02:12 PM
admittedly I was a little surprised the twist was 1 in 16, had expected 1 in 14 or so but I suppose 1 in 16 is about the same as the 222 rifles of the era, there seems to be plenty 30-50gr...
Liked On: 11-03-2024, 05:26 PM
I’ve got a few rounds that the previous owner loaded, I’ll be pulling them apart but they were apparently loaded with 20-21 gr of 2207, which looking at adi data for 222 is about right, I’m thinking...
Liked On: 11-03-2024, 11:41 AM
I have a cheap $50 can from hunting and fishing on my lithgow 22, using CCI subsonic HP's and its pretty quiet will happily use without ear pro, finishing shots can be fairly loud compared to general...
Liked On: 30-11-2023, 12:54 AM
I have a cheap $50 can from hunting and fishing on my lithgow 22, using CCI subsonic HP's and its pretty quiet will happily use without ear pro, finishing shots can be fairly loud compared to general...
Liked On: 29-11-2023, 06:06 PM
I have a cheap $50 can from hunting and fishing on my lithgow 22, using CCI subsonic HP's and its pretty quiet will happily use without ear pro, finishing shots can be fairly loud compared to general...
Liked On: 22-11-2023, 01:42 PM
Looks like the issue is sorted thanks to Fssprecision, The issue pretty much came down to general wear on the rifle, have had the hammer built up with weld so that it interfaces with the bolt and...
Liked On: 12-11-2023, 02:57 PM
Looks like the issue is sorted thanks to Fssprecision, The issue pretty much came down to general wear on the rifle, have had the hammer built up with weld so that it interfaces with the bolt and...
Liked On: 10-11-2023, 06:59 PM
Looks like the issue is sorted thanks to Fssprecision, The issue pretty much came down to general wear on the rifle, have had the hammer built up with weld so that it interfaces with the bolt and...
Liked On: 10-11-2023, 05:21 PM
Looks like the issue is sorted thanks to Fssprecision, The issue pretty much came down to general wear on the rifle, have had the hammer built up with weld so that it interfaces with the bolt and...
Liked On: 10-11-2023, 04:25 PM
Looks like the issue is sorted thanks to Fssprecision, The issue pretty much came down to general wear on the rifle, have had the hammer built up with weld so that it interfaces with the bolt and...
Liked On: 10-11-2023, 04:08 PM
Looks like the issue is sorted thanks to Fssprecision, The issue pretty much came down to general wear on the rifle, have had the hammer built up with weld so that it interfaces with the bolt and...
Liked On: 10-11-2023, 04:00 PM
Ive got my lee press mounted with 2 F clamps, lee press is bolted to a 50mm piece of wood which is then clamped to my desk. Haven't had any issues so far 236228
Liked On: 27-10-2023, 10:20 PM