NAKED_GOOSE
Member

42 Likes

Page 2 of 3 First 123 Last

• Jump to page:

1. 
   Micky Duck liked post by NAKED_GOOSE On thread : DIY Fibre wads?

   Sounds like I’ll have some experimenting to do with lubed and un-lubed wads I’m aiming for some lighter loads, not quite cowboy level but still want to be able to shoot critters without issue. ...

   Liked On: 27-10-2023, 06:48 PM

2. 
   omark liked post by NAKED_GOOSE On thread : DIY Fibre wads?

   For overshot cards you can use cereal boxes or similar, printed side is normally water resistant as a bonus

   Liked On: 27-10-2023, 04:55 PM

3. 
   timattalon liked post by NAKED_GOOSE On thread : Mounting a press

   Ive got my lee press mounted with 2 F clamps, lee press is bolted to a 50mm piece of wood which is then clamped to my desk. Haven't had any issues so far 236228

   Liked On: 27-10-2023, 02:36 PM

4. 
   rupert liked post by NAKED_GOOSE On thread : DIY Fibre wads?

   Priced out some felt, the 9.5mm I priced was 11 cents per wad, the 12.7mm was 15 cents per wad, the ballistic products wads look to be around 5 cents per wad, using 6mm cork works out to 3 cents per...

   Liked On: 26-10-2023, 07:37 PM

5. 
   XR500 liked post by NAKED_GOOSE On thread : Hearing protection?

   Im using the 3m peltors that you linked, Ive not encountered any issues with muffs contacting the gun stocks, fairly comfortable, more so than some howard leight muffs brought at the same time...

   Liked On: 09-09-2023, 02:04 PM

6. 
   kruza liked post by NAKED_GOOSE On thread : What little pesties did you bowl over today?

   232609 232610 Been slow going, only got two possums a few nights back now, seems like they've buggered off somewhere as i haven't found any the last two nights I went out. close to a kilo in...

   Liked On: 06-09-2023, 06:26 AM

7. 
   Micky Duck liked post by NAKED_GOOSE On thread : What little pesties did you bowl over today?

   232609 232610 Been slow going, only got two possums a few nights back now, seems like they've buggered off somewhere as i haven't found any the last two nights I went out. close to a kilo in...

   Liked On: 05-09-2023, 09:01 PM

8. 
   Moa Hunter liked post by NAKED_GOOSE On thread : is a 3-9x40 scope an overkill for a .22?

   Have a 3-9-x40 on my 22 and I use the 9X quite alot, then again my eyesight is a little subpar, dont think I've shot past 50m either :D

   Liked On: 05-09-2023, 09:14 AM

9. 
   Dundee liked post by NAKED_GOOSE On thread : What little pesties did you bowl over today?

   232609 232610 Been slow going, only got two possums a few nights back now, seems like they've buggered off somewhere as i haven't found any the last two nights I went out. close to a kilo in...

   Liked On: 04-09-2023, 07:37 PM

10. 
    Shearer liked post by NAKED_GOOSE On thread : What little pesties did you bowl over today?

    232609 232610 Been slow going, only got two possums a few nights back now, seems like they've buggered off somewhere as i haven't found any the last two nights I went out. close to a kilo in...

    Liked On: 04-09-2023, 10:45 AM

11. 
    Old_School liked post by NAKED_GOOSE On thread : is a 3-9x40 scope an overkill for a .22?

    Have a 3-9-x40 on my 22 and I use the 9X quite alot, then again my eyesight is a little subpar, dont think I've shot past 50m either :D

    Liked On: 28-08-2023, 02:27 PM

12. 
    Old_School liked post by NAKED_GOOSE On thread : is a 3-9x40 scope an overkill for a .22?

    funnily enough MB I've thought the same thing more than once, cant justify to myself spending on a scope for my $50 22lr though.

    Liked On: 28-08-2023, 02:26 PM

13. 
    Micky Duck liked post by NAKED_GOOSE On thread : How much pitting is too much?

    Did clean up a fair bit, still loads of pitting though, might consider have a gunsmith look over it but I think given the overall condition its probably not really safe to be anything other than a...

    Liked On: 04-08-2023, 12:45 PM

14. 
    Moa Hunter liked post by NAKED_GOOSE On thread : How much pitting is too much?

    You’ve both hit the nail on the head there, working it with the bore brush for a few minutes and most of it seems to of cleaned out, going to keep working it to see if it will all clean out, ...

    Liked On: 24-07-2023, 07:40 PM

15. 
    Moa Hunter liked post by NAKED_GOOSE On thread : How much pitting is too much?

    It pretty much all cleaned out, few little darker patches left that don’t seem to want to come out, maybe the cause of the fouling building up around that area? The other barrel was shiny and had...

    Liked On: 24-07-2023, 07:40 PM

Page 2 of 3 First 123 Last

• Jump to page: