Got to laugh at this headline :XD:218043
Liked On: 05-03-2023, 09:33 PM
217030
Liked On: 05-03-2023, 09:31 PM
The HMR earns its keep this-217651morning
Liked On: 05-03-2023, 09:31 PM
Been following this for a while in the 90s early 2000 up to 2019 I have pulled 1000 approx .min x nzdf men86 projs and replaced with 135 lapua megas no resizing etc using a collet puller just...
Liked On: 28-02-2023, 10:56 PM
As someone who had never even heard of doing it three posts back, you have some strong opinions on how it wont work. :) Rest easy. It works fine. Listen to some people who have actually done it, and...
Liked On: 28-02-2023, 10:55 PM
People are making this sound really complicated. Its not. Pull the bullets, set up your die for neck sizing, take the decapping pin out or the expander completely) neck size them all. Take an average...
Liked On: 28-02-2023, 10:54 PM
Think there was a 3 barrel cz set up on retardme
Liked On: 28-02-2023, 10:49 PM
Gidday. I have a spare Rem 700 bolt with the correct boltface that is yours for $350 posted to your gunsmith!
Liked On: 28-02-2023, 10:44 PM
My experience is using it for my 223 , as others have said ," underrated" . I would add , I found the brass to be extremely hard and annealed all 200 pieces , it just improved on what was already...
Liked On: 25-02-2023, 10:58 PM
Another tip is to buy just dirty old plain vanilla Colby, it will transform into something wondrous. Always smoke more than you need, it makes very appreciated xmas gifts,and little thank you...
Liked On: 07-02-2023, 09:54 PM
Nice!! I did the same with a Bradley (different connections, but same concept) A tip for smoking cheese, is 1kg block, cut to 1/4,and put each piece on a small bit of baking paper.... Oh and...
Liked On: 07-02-2023, 09:53 PM
I’ve been wanting to start experimenting with cold smoked cheese, butter, fish etc. but the Traeger only goes down to 75’. Too hot for the job in hand. What to do? I found an old Smokai in the...
Liked On: 07-02-2023, 09:52 PM
Tentman Here's a rib cage hole after penetrating a shoulder in a Fallow at 230 yards with the 52 grn Targex. Punch well above their weight and are relatively as cheap as chips. NZ made and available...
Liked On: 30-01-2023, 09:34 PM
did you ask for the gentalia of all staff to be removed to protect yourself from rape?????
Liked On: 30-01-2023, 09:31 PM
Stainless baffle from my 223, several thousand rounds through it quite a lot with an AR on pest control. The duralum baffle was pretty munted after a couple of hundred but it was being shot at well...
Liked On: 29-01-2023, 09:14 PM