NCGNSMITH
Member

27 Likes

Page 1 of 2 12 Last

• Jump to page:

1. 
   dannyb liked post by NCGNSMITH On thread : Cause of split groups?

   I sorted one for a fella the other day doing same thing in 300 win mag Light weight strata first thing I would look out would be scope mounting and bedding Use some araldite super strength or...

   Liked On: 14-03-2024, 07:25 AM

2. 
   Micky Duck liked post by NCGNSMITH On thread : Re-barrel a rifle - trigger event ?

   As a gunsmith no we are definitely not exempt from the 30 day rule And the email sent out to dealers outlined this pretty clearly (for a change) Was told by local arms officer that it has to be...

   Liked On: 24-01-2024, 01:44 PM

3. 
   chainsaw liked post by NCGNSMITH On thread : Re-barrel a rifle - trigger event ?

   As a gunsmith no we are definitely not exempt from the 30 day rule And the email sent out to dealers outlined this pretty clearly (for a change) Was told by local arms officer that it has to be...

   Liked On: 23-01-2024, 12:18 PM

4. 
   Cyclops liked post by NCGNSMITH On thread : Re-barrel a rifle - trigger event ?

   As a gunsmith no we are definitely not exempt from the 30 day rule And the email sent out to dealers outlined this pretty clearly (for a change) Was told by local arms officer that it has to be...

   Liked On: 23-01-2024, 11:19 AM

5. 
   dannyb liked post by NCGNSMITH On thread : Re-barrel a rifle - trigger event ?

   As a gunsmith no we are definitely not exempt from the 30 day rule And the email sent out to dealers outlined this pretty clearly (for a change) Was told by local arms officer that it has to be...

   Liked On: 23-01-2024, 11:11 AM

6. 
   chainsaw liked post by NCGNSMITH On thread : Re-barrel a rifle - trigger event ?

   No not a trigger event if it is completed under 30 days And you drop it off to the gunsmith and pick it up He would have to source the barrel ect or you pick up in person From the manufacturer...

   Liked On: 22-01-2024, 05:35 PM

7. 
   dannyb liked post by NCGNSMITH On thread : Re-barrel a rifle - trigger event ?

   No not a trigger event if it is completed under 30 days And you drop it off to the gunsmith and pick it up He would have to source the barrel ect or you pick up in person From the manufacturer...

   Liked On: 22-01-2024, 05:06 PM

8. 
   Bill999 liked post by NCGNSMITH On thread : Ruger American rebarrel options

   8.6 blackout is quite good fun but not as cheap to run as a 350 legend ect

   Liked On: 13-01-2024, 06:17 PM

9. 
   Hugh Shields liked post by NCGNSMITH On thread : .17 HMR blow up

   On the change barrel cz rifles if there is any bulge on the head of a fired case I Have given the barrel shoulder a skim in the lathe to tighten up the headspace To more minimum specs but all of...

   Liked On: 10-01-2024, 01:15 PM

10. 
    Bill999 liked post by NCGNSMITH On thread : .17 HMR blow up

    On the change barrel cz rifles if there is any bulge on the head of a fired case I Have given the barrel shoulder a skim in the lathe to tighten up the headspace To more minimum specs but all of...

    Liked On: 10-01-2024, 07:45 AM

11. 
    chainsaw liked post by NCGNSMITH On thread : Dakota calibres

    There is a few 7mm that were built in chch by a mate but the extreme price of the Brass has put any new builds off last list price it was more then lapua factory 338 LM brass When 338 was $5 each...

    Liked On: 04-01-2024, 06:35 PM

12. 
    Micky Duck liked post by NCGNSMITH On thread : Looking for a New Hunting rifle

    I have fixed a tonne of bolt faces in bergara rifles that have had the primers flow back down the Firing pin hole, bushing the face of the bolt and turning the pin down till it is a nice fit and...

    Liked On: 04-01-2024, 01:42 PM

13. 
    Fssprecision liked post by NCGNSMITH On thread : Using large suppressor for small calibre

    17HMR will fill your good centerfire suppressor with a heap of crap it a pretty Dirty wee round will work fine on the rifle though

    Liked On: 04-01-2024, 03:50 AM

14. 
    Arced liked post by NCGNSMITH On thread : Looking for a New Hunting rifle

    I have fixed a tonne of bolt faces in bergara rifles that have had the primers flow back down the Firing pin hole, bushing the face of the bolt and turning the pin down till it is a nice fit and...

    Liked On: 04-01-2024, 01:35 AM

15. 
    JemO liked post by NCGNSMITH On thread : Tikka stock

    Be careful how you go about this charging someone to work on a rifle it Is how they described Gunsmithing as a dealer activity a few years back When there were guys operating on A cat licensing...

    Liked On: 22-12-2023, 05:58 PM

Page 1 of 2 12 Last

• Jump to page: