i built one quite similar to your design brad (25 years ago) but i ran the "A" right out to within about 15 mm of the outside of the tyres so in rough going the wheels can't snag on anything. also,...
Liked On: 12-04-2024, 09:53 PM
O-rings have around 15% "crush" when installed. a little more on some static sealing arrangements. the o-ring groove will be something like 15-20% wider than the o-ring. almost certainly it'll be a...
Liked On: 20-07-2023, 08:16 AM
i believe wilson hellaby in auckland need 1000 goats a week for the supermarkets up there - they pay good money too (most of 6 dollars + gst) . there could be a couple of thousand dollars in those...
Liked On: 15-07-2023, 08:01 PM
live and healthy loaded onto the truck - they pay cartage and the price is best for 7 to 18 kg carcass weight. Getting them into the yards is where you'll earn your keep. hunting them you think...
Liked On: 15-07-2023, 06:51 PM
Just checked through some records - $5.70 a kg about 10 months ago. not sure about the latest schedule.
Liked On: 14-07-2023, 11:04 AM
live and healthy loaded onto the truck - they pay cartage and the price is best for 7 to 18 kg carcass weight. Getting them into the yards is where you'll earn your keep. hunting them you think...
Liked On: 14-07-2023, 11:04 AM
i believe wilson hellaby in auckland need 1000 goats a week for the supermarkets up there - they pay good money too (most of 6 dollars + gst) . there could be a couple of thousand dollars in those...
Liked On: 14-07-2023, 11:03 AM
live and healthy loaded onto the truck - they pay cartage and the price is best for 7 to 18 kg carcass weight. Getting them into the yards is where you'll earn your keep. hunting them you think...
Liked On: 14-07-2023, 10:42 AM
i took a 650 as part payment for my Z1R when i sold it. That XJ got caned for 2 years with no maintenance and never missed a beat... sold it to pay for a pallet of milk powder when bull-beef was...
Liked On: 03-07-2023, 06:48 PM
just measured my one - 550mm of drawbar then 2 metres of deck. the axle is 1.4 metres from the front of the deck so the quad takes a good proportion of the trailer load. one disadvantage is when you...
Liked On: 28-06-2023, 09:12 PM
some years ago my old stockagent came to look at some cattle and i commented that he was doing ok on the hills as previously he had struggled with his body that had seen better days. He said he'd...
Liked On: 20-05-2023, 11:58 PM
some years ago my old stockagent came to look at some cattle and i commented that he was doing ok on the hills as previously he had struggled with his body that had seen better days. He said he'd...
Liked On: 18-05-2023, 08:00 PM
If that genny has previously sat around a bit it may well have old fuel-turned to gum in the carb jets, making the engine run lean . a lean engine will surge a bit then give up long before giving you...
Liked On: 17-05-2023, 10:18 PM
i took a 650 as part payment for my Z1R when i sold it. That XJ got caned for 2 years with no maintenance and never missed a beat... sold it to pay for a pallet of milk powder when bull-beef was...
Liked On: 04-05-2023, 07:00 PM
If you are going to repair it in situ then Belzona will give you a fighting chance - esp with a good fitting stepped key and the bolt torqued up with loctite 262. if you need some Belzona pm me and i...
Liked On: 23-04-2023, 06:11 PM