overflow50
Member

6 Likes

1. 
   overflow50 liked post by Puffin On thread : Freebore Decision for a .284 Winchester Reamer

   PART 5 Verifying the Cartridge Overall Length predictions Measurements for some cartridge overall lengths can now be taken for actual bullets seated to be just touching . These can then be...

   Liked On: 01-01-2026, 08:28 PM

2. 
   overflow50 liked post by Scott Cowan On thread : My new 6.5 wildcat home build

   6.5 AD wildcat home build. Tools needed - an angle grinder and some old dies lol. Hi guys, been a busy year but I’ve had time to do a few projects, one was developing a replacement for a 6.5...

   Liked On: 26-12-2025, 03:30 PM

3. 
   overflow50 liked post by Friwi On thread : Hornady 174 ELD-VT - feedback?

   I think that is the one. They did not elaborate on too much on it but you could listen to their hint about them having shot animals with them.

   Liked On: 02-11-2025, 08:07 AM

4. 
   overflow50 liked post by gimp On thread : Testing a conventional approach to load development

   A conventional approach to load development is: 1. Select a powder and projectile that appear suitable 2. Identify the OAL or comparator length to the lands 3. Load a series of rounds in...

   Liked On: 01-07-2024, 11:10 PM

5. 
   overflow50 liked post by GregD On thread : NZ Hunter

   I’ve been meaning to answer a couple of the questions, finally found time sitting on the ferry to do it! Firstly, Mountaineering, as Dalts says, you generally don’t rope up unless you are in...

   Liked On: 09-03-2024, 06:46 PM

6. 
   overflow50 liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   MAKING THE MOLD Up until this stage I was fairly comfortable with what I had to do and how to proceed, from here I was in unfamiliar territory. Consequently, I sought advice and received some very...

   Liked On: 25-02-2020, 06:32 PM