Done a absolutely insane amount of cold blue jobs in my time and have gotten pretty good at it They look fantastic but the finish wears off in 5 minutes or and very least lightens up Been talking...
Liked On: 21-06-2022, 09:13 AM
199261 Just when I thought I was about to finish this stock, I bump the spacing cutter off the bench and bend it…. At least the forend is done, grip is going to have to wait till new tool arrives...
Liked On: 14-06-2022, 09:30 AM
Done 196558 196559 196560 196561
Liked On: 10-05-2022, 10:58 AM
Sanding completed, and first coat of sealer applied. Can now see the contrast and true colour of this piece. There are a few highlights lurking in the wood, which will show up nicely once all the...
Liked On: 06-05-2022, 10:32 AM
Getting close now. Hopefully just another hour or so of sanding and then we get to really see the grain when the sealer goes on 196199
Liked On: 05-05-2022, 07:54 AM
Sneak peek for those interested. Shaping up nicely 195434
Liked On: 24-04-2022, 08:45 PM
Here is another project that I have been working on, I took a new 410 and re-barreled it with a length of 9mm barrel, then fitted a full length can including K baffles in the end section. The idea...
Liked On: 08-04-2022, 11:09 AM
Paul. This has been a fantastic read. You are very talented. I read with interest because I have an Anschutz 1712 22.
Liked On: 05-04-2022, 09:04 AM
Back onto the new stock after a week out of town with work. Got the bottom metal inletted to 95% depth, and action inletting begun. Going well so far 194006 194007
Liked On: 04-04-2022, 09:47 PM
That looks awesome. Your a skilled man
Liked On: 04-04-2022, 07:36 AM
I made this up out of a 22 off cut, the top part of a lee 223 die that was stuffed. Works Well 193772
Liked On: 01-04-2022, 09:04 PM
Here we go again… Made a decent start on the latest stock. This one is for a Zastava .223 I have, that was going to be a 6x45. Will stay a .223 for now, because I’ve already got one 6x45. The...
Liked On: 28-03-2022, 09:43 PM
Some years ago I restocked my Martini 12/15. I made my own Martini stock (from Red Beech), plus I had to figure out about drilling that long hole through it. Here's my solution, and I hope it helps...
Liked On: 28-03-2022, 09:39 PM
Haha, yeah watch this space…. That’s the mid term plan
Liked On: 03-02-2022, 08:35 PM
Checkering complete, just needs a quick coat of oil and it’s good to go on the hill. Finished it whilst working away from home, so will post photos of it all assembled when I get back next week. ...
Liked On: 03-02-2022, 03:25 PM