PaulNZ
Member

367 Likes

Page 21 of 25 First ... 78910111213141516171819202122232425 Last

• Jump to page:

1. 
   SixtyTen liked post by PaulNZ On thread : Walnut Stock Build

   Another few snapshots from the milling for your interest. Note that these are all with the wood still wet – the colour did change considerably after drying. https://i.imgur.com/uGWBeQB.jpg ...

   Liked On: 04-04-2020, 05:50 PM

2. 
   Klhari liked post by PaulNZ On thread : Tinting epoxy

   I think spraypaint might be risky, but worth a test at least. One stockmaker recommended lampblack (candle soot) as a good bedding pigment. Seems to be plenty of guidance on google on gathering it...

   Liked On: 04-04-2020, 10:33 AM

3. 
   akaroa1 liked post by PaulNZ On thread : Walnut Stock Build

   Yep, at least as far as possible. I spent a whole afternoon on the millers yard with his waterblaster and a crowbar getting as much solidified dirt and stones out of the root ball as possible. We...

   Liked On: 04-04-2020, 10:27 AM

4. 
   Steve123 liked post by PaulNZ On thread : Tinting epoxy

   I think spraypaint might be risky, but worth a test at least. One stockmaker recommended lampblack (candle soot) as a good bedding pigment. Seems to be plenty of guidance on google on gathering it...

   Liked On: 04-04-2020, 10:23 AM

5. 
   homebrew.357 liked post by PaulNZ On thread : Walnut Stock Build

   Another few snapshots from the milling for your interest. Note that these are all with the wood still wet – the colour did change considerably after drying. https://i.imgur.com/uGWBeQB.jpg ...

   Liked On: 04-04-2020, 10:21 AM

6. 
   homebrew.357 liked post by PaulNZ On thread : Walnut Stock Build

   Thanks for the responses all. So looking through the gun cabinet my Anschutz 1717 .17hmr was chosen as the restocking victim candidate. I thought I had a picture of it in the original stock but...

   Liked On: 03-04-2020, 08:41 PM

7. 
   nevereadyfreddy liked post by PaulNZ On thread : Walnut Stock Build

   Thanks for the responses all. So looking through the gun cabinet my Anschutz 1717 .17hmr was chosen as the restocking victim candidate. I thought I had a picture of it in the original stock but...

   Liked On: 03-04-2020, 07:04 PM

8. 
   Steve123 liked post by PaulNZ On thread : Walnut Stock Build

   Thanks. If you create a thread when you build that, it's definitely one I'll be following.

   Liked On: 03-04-2020, 05:38 PM

9. 
   rewa liked post by PaulNZ On thread : Walnut Stock Build

   Thanks for the responses all. So looking through the gun cabinet my Anschutz 1717 .17hmr was chosen as the restocking victim candidate. I thought I had a picture of it in the original stock but...

   Liked On: 03-04-2020, 04:26 PM

10. 
    rewa liked post by PaulNZ On thread : Walnut Stock Build

    I wasn’t going to make this thread until I was a bit further along, however perhaps with the current lockdown now’s a good time. I know I appreciate reading similar threads created by other members –...

    Liked On: 03-04-2020, 04:25 PM

11. 
    grunzter liked post by PaulNZ On thread : Walnut Stock Build

    I wasn’t going to make this thread until I was a bit further along, however perhaps with the current lockdown now’s a good time. I know I appreciate reading similar threads created by other members –...

    Liked On: 03-04-2020, 02:06 PM

12. 
    Steelisreal liked post by PaulNZ On thread : Walnut Stock Build

    Thanks for the responses all. So looking through the gun cabinet my Anschutz 1717 .17hmr was chosen as the restocking victim candidate. I thought I had a picture of it in the original stock but...

    Liked On: 03-04-2020, 12:50 PM

13. 
    Moa Hunter liked post by PaulNZ On thread : Walnut Stock Build

    Thanks for the responses all. So looking through the gun cabinet my Anschutz 1717 .17hmr was chosen as the restocking victim candidate. I thought I had a picture of it in the original stock but...

    Liked On: 03-04-2020, 12:28 PM

14. 
    Moa Hunter liked post by PaulNZ On thread : Walnut Stock Build

    I wasn’t going to make this thread until I was a bit further along, however perhaps with the current lockdown now’s a good time. I know I appreciate reading similar threads created by other members –...

    Liked On: 03-04-2020, 12:03 PM

15. 
    chainsaw liked post by PaulNZ On thread : Walnut Stock Build

    I wasn’t going to make this thread until I was a bit further along, however perhaps with the current lockdown now’s a good time. I know I appreciate reading similar threads created by other members –...

    Liked On: 03-04-2020, 11:59 AM

Page 21 of 25 First ... 78910111213141516171819202122232425 Last

• Jump to page: