USB camera endoscopes are now common enough for around $20 online with the 5.5mm diameter required for fitting most bore sizes. The problem remains the relatively long focal length settings on these,...
Liked On: 15-11-2018, 10:05 PM
With a 14" barrel you'll be limited to a little over 2400 ft/sec with a 150gr bullet and AR2208 anyway. I'm not sure that changing either the bullet, powder, or quantity of powder is such a good...
Liked On: 11-11-2018, 08:26 PM
I was hoping that Tankd and/or Ryan would have posted some examples of Ladder Testing where ladder nodes were conclusively found, and that knowing this had resulted in optimising a load for better...
Liked On: 10-11-2018, 06:59 PM
With a 14" barrel you'll be limited to a little over 2400 ft/sec with a 150gr bullet and AR2208 anyway. I'm not sure that changing either the bullet, powder, or quantity of powder is such a good...
Liked On: 10-11-2018, 12:59 PM
With a 14" barrel you'll be limited to a little over 2400 ft/sec with a 150gr bullet and AR2208 anyway. I'm not sure that changing either the bullet, powder, or quantity of powder is such a good...
Liked On: 10-11-2018, 07:30 AM
With a 14" barrel you'll be limited to a little over 2400 ft/sec with a 150gr bullet and AR2208 anyway. I'm not sure that changing either the bullet, powder, or quantity of powder is such a good...
Liked On: 10-11-2018, 06:19 AM
With a 14" barrel you'll be limited to a little over 2400 ft/sec with a 150gr bullet and AR2208 anyway. I'm not sure that changing either the bullet, powder, or quantity of powder is such a good...
Liked On: 10-11-2018, 06:07 AM
That is for quite a long CoL. I think you will be limited to 2.820" in the Kimber, maybe a little less, in which case I wouldn't jump in at 41gr. Shorter CoL will crank up the peak pressure. Try...
Liked On: 09-11-2018, 11:38 PM
My post began with examples based around a hypothetical perfect rifle using perfect ammunition. Simulations are used where the source of data or observations are not available. There is no issue with...
Liked On: 07-11-2018, 11:15 AM
Ladder testing and why it most likely won’t be a good use of your time and ammunition This is a follow up to my post in Bagheera ’s thread on the reasons forum members might decide to re-run a...
Liked On: 07-11-2018, 08:37 AM
Ladder testing and why it most likely won’t be a good use of your time and ammunition This is a follow up to my post in Bagheera ’s thread on the reasons forum members might decide to re-run a...
Liked On: 05-11-2018, 06:52 PM
My post began with examples based around a hypothetical perfect rifle using perfect ammunition. Simulations are used where the source of data or observations are not available. There is no issue with...
Liked On: 05-11-2018, 12:19 PM
Ladder testing and why it most likely won’t be a good use of your time and ammunition This is a follow up to my post in Bagheera ’s thread on the reasons forum members might decide to re-run a...
Liked On: 05-11-2018, 12:18 PM
My post began with examples based around a hypothetical perfect rifle using perfect ammunition. Simulations are used where the source of data or observations are not available. There is no issue with...
Liked On: 05-11-2018, 11:41 AM
Not a Audette ladder test though but agreed...
Liked On: 04-11-2018, 10:03 PM