r87mm
Member

221 Likes

Page 10 of 15 First 123456789101112131415 Last

• Jump to page:

1. 
   Moa Hunter liked post by r87mm On thread : Chamois

   Hit a chamois front on and not a spec of blood to be found. Neck was broken by the way it flopped around when I recovered it. Damage was all internal so without dressing it out you may not know....

   Liked On: 25-05-2019, 08:50 PM

2. 
   gsp follower liked post by r87mm On thread : Patternmaster

   Do the test. I did and found my gun was shooting way high and to the left. Sorted that now. Also my 1/4 choke gave the nicest even pattern out to 45 yards. The mod choke was a bit tighter but not as...

   Liked On: 18-04-2019, 06:02 PM

3. 
   7mm Rem Mag liked post by r87mm On thread : Patternmaster

   Do the test. I did and found my gun was shooting way high and to the left. Sorted that now. Also my 1/4 choke gave the nicest even pattern out to 45 yards. The mod choke was a bit tighter but not as...

   Liked On: 16-04-2019, 05:42 PM

4. 
   Nathan F liked post by r87mm On thread : Patternmaster

   Do the test. I did and found my gun was shooting way high and to the left. Sorted that now. Also my 1/4 choke gave the nicest even pattern out to 45 yards. The mod choke was a bit tighter but not as...

   Liked On: 15-04-2019, 09:49 PM

5. 
   xtightg liked post by r87mm On thread : 7mm SAUM, WSM, Blaser Magnum, Rem Mag and 284 Superpig Discussion

   Have you check the primers are seated properly? I had the same thing happen to me recently. Sized they fitted but loaded they didn't. Turns out a new cartridge to me and even though same brand of...

   Liked On: 03-03-2019, 12:32 AM

6. 
   superdiver liked post by r87mm On thread : 7mm SAUM, WSM, Blaser Magnum, Rem Mag and 284 Superpig Discussion

   Have you check the primers are seated properly? I had the same thing happen to me recently. Sized they fitted but loaded they didn't. Turns out a new cartridge to me and even though same brand of...

   Liked On: 02-03-2019, 10:58 PM

7. 
   A330driver liked post by r87mm On thread : Beretta A400 worth the money

   If you go the a400 way pm me as I might be able to put you into a near new one a bit cheaper than new

   Liked On: 09-02-2019, 02:49 AM

8. 
   Dev liked post by r87mm On thread : 7mm Rem Mag Reloading troubles...

   Imo ladder test is ok if seeing what pressure and an idea of velocity and gives you an idea of maximum. Can't see it being much good for finding accuracy although many people use it as a starting...

   Liked On: 20-01-2019, 02:57 PM

9. 
   Dev liked post by r87mm On thread : 7mm Rem Mag Reloading troubles...

   Welcome to my world. In short to solve your problem get rid of anything with hornady written on it. But seriously been down this road with my 7mm. Sst, eld-x/m same results as you. Had barrel checked...

   Liked On: 17-01-2019, 02:37 PM

10. 
    25/08IMP liked post by r87mm On thread : 7mm Rem Mag Reloading troubles...

    Welcome to my world. In short to solve your problem get rid of anything with hornady written on it. But seriously been down this road with my 7mm. Sst, eld-x/m same results as you. Had barrel checked...

    Liked On: 17-01-2019, 01:29 PM

11. 
    outdoorlad liked post by r87mm On thread : Blaser barrel pillar issues

    I'd probably send it to a gun smith and get the job done properly. The wrong grade of steel or not getting the threads sorted will cause more problems. Dean Maisey said Blaser have a slightly under...

    Liked On: 09-12-2018, 01:24 PM

12. 
    rewa liked post by r87mm On thread : what calibre for the young fella

    243 and suppress it if you can to take a little more recoil out and cut the noise so he enjoys it a bit more

    Liked On: 27-11-2018, 09:43 PM

13. 
    norsk liked post by r87mm On thread : what calibre for the young fella

    243 and suppress it if you can to take a little more recoil out and cut the noise so he enjoys it a bit more

    Liked On: 26-11-2018, 06:15 AM

14. 
    cambo liked post by r87mm On thread : CCi primers....400 vs 450

    Perhaps load a few up starting a couple of grains lighter with the 450's to see what they do in case such a situation ever arises again? Least you'll have a tried and tested back up you can turn too

    Liked On: 17-11-2018, 06:47 PM

15. 
    Cordite liked post by r87mm On thread : Flat base .308

    Boat tail designs were invented to stop me swearing while trying to balance flat base projectiles on cases and having them fall off. This problem is made even worse with smaller diameter cartridges....

    Liked On: 16-11-2018, 01:19 PM

Page 10 of 15 First 123456789101112131415 Last

• Jump to page: